Descobrir os drivers certos [RESOLVIDO]

danielpaixao
(usa Ubuntu)

Enviado em 03/06/2018 - 23:14h

Instalei o Deepin no meu computador e o sistema instalou os drivers genéricos e até certo ponto está funcionando bem. O áudio, porém, ficou meio estranho. Se aumento um pouco o volume, fica com o som de "taquara rachada".... Algo estranho. Minha placa é realtek. Será que tem como achar o driver correto no linux.


Vejam o relatório que gerei no terminal sobre meu computador. Tem um monte de informações mas sou leigo e não consigo interpretar essas informações. Alguém poderia lê-las e me passar um diagnóstico do meu hardware, por favor? Segue os dados coletados via terminal, comando dmseg

ivanete@ivanete-PC:~$ sudo dmesg

[sudo] senha para ivanete: 

[    0.000000] Linux version 4.15.0-21deepin-generic (pbuilder@gs-PC) (gcc version 7.2.0 (Debian 7.2.0-20)) #21 SMP Mon May 21 05:20:09 UTC 2018 (Ubuntu 4.15.0-21deepin.21-generic 4.15.17)

[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-21deepin-generic root=UUID=a3b6e92c-3779-44e8-90ea-32a88d5444c7 ro splash quiet

[    0.000000] KERNEL supported cpus:

[    0.000000]   Intel GenuineIntel

[    0.000000]   AMD AuthenticAMD

[    0.000000]   Centaur CentaurHauls

[    0.000000] x86/fpu: x87 FPU will use FXSAVE

[    0.000000] e820: BIOS-provided physical RAM map:

[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable

[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff7ffff] usable

[    0.000000] BIOS-e820: [mem 0x000000007ff80000-0x000000007ff8dfff] ACPI data

[    0.000000] BIOS-e820: [mem 0x000000007ff8e000-0x000000007ffdffff] ACPI NVS

[    0.000000] BIOS-e820: [mem 0x000000007ffe0000-0x000000007fffffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable

[    0.000000] NX (Execute Disable) protection: active

[    0.000000] random: fast init done

[    0.000000] SMBIOS 2.3 present.

[    0.000000] DMI: System manufacturer System Product Name/P5WD2, BIOS 0501     03/27/2006

[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved

[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable

[    0.000000] AGP: No AGP bridge found

[    0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000

[    0.000000] MTRR default type: uncachable

[    0.000000] MTRR fixed ranges enabled:

[    0.000000]   00000-9FFFF write-back

[    0.000000]   A0000-DFFFF uncachable

[    0.000000]   E0000-EFFFF write-through

[    0.000000]   F0000-FFFFF write-protect

[    0.000000] MTRR variable ranges enabled:

[    0.000000]   0 base 080000000 mask F80000000 uncachable

[    0.000000]   1 base 000000000 mask F00000000 write-back

[    0.000000]   2 base 100000000 mask F80000000 write-back

[    0.000000]   3 disabled

[    0.000000]   4 disabled

[    0.000000]   5 disabled

[    0.000000]   6 disabled

[    0.000000]   7 disabled

[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  

[    0.000000] total RAM covered: 4096M

[    0.000000] Found optimal setting for mtrr clean up

[    0.000000]  gran_size: 64K 	chunk_size: 64K 	num_reg: 2  	lose cover RAM: 0G

[    0.000000] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved

[    0.000000] e820: last_pfn = 0x7ff80 max_arch_pfn = 0x400000000

[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [        (ptrval)]

[    0.000000] Scanning 1 areas for low memory corruption

[    0.000000] Base memory trampoline at [        (ptrval)] 99000 size 24576

[    0.000000] BRK [0x10af3e000, 0x10af3efff] PGTABLE

[    0.000000] BRK [0x10af3f000, 0x10af3ffff] PGTABLE

[    0.000000] BRK [0x10af40000, 0x10af40fff] PGTABLE

[    0.000000] BRK [0x10af41000, 0x10af41fff] PGTABLE

[    0.000000] BRK [0x10af42000, 0x10af42fff] PGTABLE

[    0.000000] BRK [0x10af43000, 0x10af43fff] PGTABLE

[    0.000000] BRK [0x10af44000, 0x10af44fff] PGTABLE

[    0.000000] RAMDISK: [mem 0x31ed1000-0x34f5ffff]

[    0.000000] ACPI: Early table checksum verification disabled

[    0.000000] ACPI: RSDP 0x00000000000FA960 000014 (v00 ACPIAM)

[    0.000000] ACPI: RSDT 0x000000007FF80000 000034 (v01 A M I  OEMRSDT  03000627 MSFT 00000097)

[    0.000000] ACPI: FACP 0x000000007FF80200 000081 (v01 A M I  OEMFACP  03000627 MSFT 00000097)

[    0.000000] ACPI: DSDT 0x000000007FF80410 00831C (v01 A0251  A0251000 00000000 INTL 02002026)

[    0.000000] ACPI: FACS 0x000000007FF8E000 000040

[    0.000000] ACPI: APIC 0x000000007FF80390 000080 (v01 A M I  OEMAPIC  03000627 MSFT 00000097)

[    0.000000] ACPI: OEMB 0x000000007FF8E040 000066 (v01 A M I  AMI_OEM  03000627 MSFT 00000097)

[    0.000000] ACPI: MCFG 0x000000007FF88730 00003C (v01 A M I  OEMMCFG  03000627 MSFT 00000097)

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] No NUMA configuration found

[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000017fffffff]

[    0.000000] NODE_DATA(0) allocated [mem 0x17ffd4000-0x17fffefff]

[    0.000000] tsc: Fast TSC calibration using PIT

[    0.000000] Zone ranges:

[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]

[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]

[    0.000000]   Normal   [mem 0x0000000100000000-0x000000017fffffff]

[    0.000000]   Device   empty

[    0.000000] Movable zone start for each node

[    0.000000] Early memory node ranges

[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]

[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007ff7ffff]

[    0.000000]   node   0: [mem 0x0000000100000000-0x000000017fffffff]

[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]

[    0.000000] On node 0 totalpages: 1048350

[    0.000000]   DMA zone: 64 pages used for memmap

[    0.000000]   DMA zone: 21 pages reserved

[    0.000000]   DMA zone: 3998 pages, LIFO batch:0

[    0.000000]   DMA32 zone: 8126 pages used for memmap

[    0.000000]   DMA32 zone: 520064 pages, LIFO batch:31

[    0.000000]   Normal zone: 8192 pages used for memmap

[    0.000000]   Normal zone: 524288 pages, LIFO batch:31

[    0.000000] Reserved but unavailable: 98 pages

[    0.000000] ACPI: PM-Timer IO Port: 0x808

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[    0.000000] ACPI: IRQ0 used by override.

[    0.000000] ACPI: IRQ9 used by override.

[    0.000000] Using ACPI (MADT) for SMP configuration information

[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs

[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]

[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]

[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]

[    0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]

[    0.000000] PM: Registered nosave memory: [mem 0x7ff80000-0x7ff8dfff]

[    0.000000] PM: Registered nosave memory: [mem 0x7ff8e000-0x7ffdffff]

[    0.000000] PM: Registered nosave memory: [mem 0x7ffe0000-0x7fffffff]

[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0xffafffff]

[    0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]

[    0.000000] e820: [mem 0x80000000-0xffafffff] available for PCI devices

[    0.000000] Booting paravirtualized kernel on bare hardware

[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns

[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1

[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u524288

[    0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152

[    0.000000] pcpu-alloc: [0] 0 1 2 3 

[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1031947

[    0.000000] Policy zone: Normal

[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-21deepin-generic root=UUID=a3b6e92c-3779-44e8-90ea-32a88d5444c7 ro splash quiet

[    0.000000] AGP: Checking aperture...

[    0.000000] AGP: No AGP bridge found

[    0.000000] Calgary: detecting Calgary via BIOS EBDA area

[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!

[    0.000000] Memory: 3983188K/4193400K available (12300K kernel code, 2470K rwdata, 4224K rodata, 2404K init, 2416K bss, 210212K reserved, 0K cma-reserved)

[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

[    0.000000] Kernel/User page tables isolation: enabled

[    0.000000] ftrace: allocating 39065 entries in 153 pages

[    0.000000] Hierarchical RCU implementation.

[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.

[    0.000000] 	Tasks RCU enabled.

[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4

[    0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16

[    0.000000] Console: colour VGA+ 80x25

[    0.000000] console [tty0] enabled

[    0.000000] ACPI: Core revision 20170831

[    0.000000] ACPI: 1 ACPI AML tables successfully acquired and loaded

[    0.004000] APIC: Switch to symmetric I/O mode setup

[    0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[    0.024000] tsc: Fast TSC calibration using PIT

[    0.028000] tsc: Detected 3010.728 MHz processor

[    0.028000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6021.45 BogoMIPS (lpj=12042912)

[    0.028000] pid_max: default: 32768 minimum: 301

[    0.028000] Security Framework initialized

[    0.028000] Yama: becoming mindful.

[    0.028000] AppArmor: AppArmor initialized

[    0.028000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)

[    0.032851] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)

[    0.032927] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)

[    0.032961] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)

[    0.033379] CPU: Physical Processor ID: 0

[    0.033381] CPU: Processor Core ID: 0

[    0.033383] mce: CPU supports 4 MCE banks

[    0.033394] CPU0: Thermal monitoring enabled (TM1)

[    0.033402] process: using mwait in idle threads

[    0.033408] Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64

[    0.033410] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0

[    0.033413] Spectre V2 : Mitigation: Full generic retpoline

[    0.033649] Freeing SMP alternatives memory: 36K

[    0.040000] APIC calibration not consistent with PM-Timer: 116ms instead of 100ms

[    0.040000] APIC delta adjusted to PM-Timer: 1254438 (1455227)

[    0.040000] smpboot: CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz (family: 0xf, model: 0x4, stepping: 0x9)

[    0.040000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.

[    0.040000] ... version:                0

[    0.040000] ... bit width:              40

[    0.040000] ... generic registers:      18

[    0.040000] ... value mask:             000000ffffffffff

[    0.040000] ... max period:             0000007fffffffff

[    0.040000] ... fixed-purpose events:   0

[    0.040000] ... event mask:             000000000003ffff

[    0.040000] Hierarchical SRCU implementation.

[    0.040000] smp: Bringing up secondary CPUs ...

[    0.040000] x86: Booting SMP configuration:

[    0.040000] .... node  #0, CPUs:      #1

[    0.048667] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.

[    0.050710] smp: Brought up 1 node, 2 CPUs

[    0.050710] smpboot: Max logical packages: 2

[    0.050710] smpboot: Total of 2 processors activated (12042.91 BogoMIPS)

[    0.052261] devtmpfs: initialized

[    0.052261] x86/mm: Memory block size: 128MB

[    0.053091] evm: security.selinux

[    0.053093] evm: security.SMACK64

[    0.053094] evm: security.SMACK64EXEC

[    0.053095] evm: security.SMACK64TRANSMUTE

[    0.053096] evm: security.SMACK64MMAP

[    0.053097] evm: security.apparmor

[    0.053098] evm: security.ima

[    0.053099] evm: security.capability

[    0.053228] PM: Registering ACPI NVS region [mem 0x7ff8e000-0x7ffdffff] (335872 bytes)

[    0.053348] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns

[    0.053348] futex hash table entries: 1024 (order: 4, 65536 bytes)

[    0.053348] pinctrl core: initialized pinctrl subsystem

[    0.053348] RTC time:  1:11:43, date: 06/04/18

[    0.053348] NET: Registered protocol family 16

[    0.053348] audit: initializing netlink subsys (disabled)

[    0.053348] audit: type=2000 audit(1528074703.052:1): state=initialized audit_enabled=0 res=1

[    0.053348] cpuidle: using governor ladder

[    0.053348] cpuidle: using governor menu

[    0.053348] ACPI: bus type PCI registered

[    0.053348] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

[    0.053348] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)

[    0.053348] PCI: not using MMCONFIG

[    0.053348] PCI: Using configuration type 1 for base access

[    0.056099] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages

[    0.056375] ACPI: Added _OSI(Module Device)

[    0.056377] ACPI: Added _OSI(Processor Device)

[    0.056379] ACPI: Added _OSI(3.0 _SCP Extensions)

[    0.056380] ACPI: Added _OSI(Processor Aggregator Device)

[    0.056695] ACPI: Executed 1 blocks of module-level executable AML code

[    0.073945] No Local Variables are initialized for Method [_PDC]

[    0.073949] Initialized Arguments for Method [_PDC]:  (1 arguments defined for method invocation)

[    0.073950]   Arg0:   00000000422b327c <Obj>           Buffer(12) 01 00 00 00 01 00 00 00

[    0.073970] ACPI Error: Method parse/execution failed \_PR.CPU1._PDC, AE_INVALID_TABLE_LENGTH (20170831/psparse-550)

[    0.074179] No Local Variables are initialized for Method [_PDC]

[    0.074183] Initialized Arguments for Method [_PDC]:  (1 arguments defined for method invocation)

[    0.074185]   Arg0:   00000000422b327c <Obj>           Buffer(12) 01 00 00 00 01 00 00 00

[    0.074201] ACPI Error: Method parse/execution failed \_PR.CPU2._PDC, AE_INVALID_TABLE_LENGTH (20170831/psparse-550)

[    0.075162] ACPI: Interpreter enabled

[    0.075206] ACPI: (supports S0 S1 S3 S4 S5)

[    0.075209] ACPI: Using IOAPIC for interrupt routing

[    0.075287] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)

[    0.082415] PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in ACPI motherboard resources

[    0.082420] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!)

[    0.082441] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

[    0.082988] ACPI: Enabled 11 GPEs in block 00 to 1F

[    0.099506] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])

[    0.099517] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]

[    0.099527] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM

[    0.099549] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge

[    0.100042] PCI host bridge to bus 0000:00

[    0.100047] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]

[    0.100050] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]

[    0.100053] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]

[    0.100056] pci_bus 0000:00: root bus resource [mem 0x80010000-0xffffffff window]

[    0.100059] pci_bus 0000:00: root bus resource [bus 00-ff]

[    0.100074] pci 0000:00:00.0: [8086:2774] type 00 class 0x060000

[    0.100259] pci 0000:00:01.0: [8086:2775] type 01 class 0x060400

[    0.100324] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold

[    0.100525] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300

[    0.100551] pci 0000:00:1b.0: reg 0x10: [mem 0xbbef8000-0xbbefbfff 64bit]

[    0.100640] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold

[    0.100790] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400

[    0.100884] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

[    0.101049] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300

[    0.101099] pci 0000:00:1d.0: reg 0x20: [io  0x7000-0x701f]

[    0.101277] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300

[    0.101327] pci 0000:00:1d.1: reg 0x20: [io  0x7400-0x741f]

[    0.101501] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300

[    0.101551] pci 0000:00:1d.2: reg 0x20: [io  0x7800-0x781f]

[    0.101726] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300

[    0.101775] pci 0000:00:1d.3: reg 0x20: [io  0x8000-0x801f]

[    0.101955] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320

[    0.101980] pci 0000:00:1d.7: reg 0x10: [mem 0xbbeff800-0xbbeffbff]

[    0.102073] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold

[    0.102225] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401

[    0.102437] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100

[    0.102543] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000

[    0.102552] pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO

[    0.102558] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO

[    0.102564] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)

[    0.102734] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a

[    0.102759] pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]

[    0.102769] pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]

[    0.102779] pci 0000:00:1f.1: reg 0x18: [io  0x0000-0x0007]

[    0.102789] pci 0000:00:1f.1: reg 0x1c: [io  0x0000-0x0003]

[    0.102799] pci 0000:00:1f.1: reg 0x20: [io  0xffa0-0xffaf]

[    0.102821] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]

[    0.102823] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]

[    0.102826] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]

[    0.102828] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]

[    0.102983] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f

[    0.103003] pci 0000:00:1f.2: reg 0x10: [io  0x9800-0x9807]

[    0.103012] pci 0000:00:1f.2: reg 0x14: [io  0x9400-0x9403]

[    0.103021] pci 0000:00:1f.2: reg 0x18: [io  0x9000-0x9007]

[    0.103030] pci 0000:00:1f.2: reg 0x1c: [io  0x8800-0x8803]

[    0.103039] pci 0000:00:1f.2: reg 0x20: [io  0x8400-0x840f]

[    0.103049] pci 0000:00:1f.2: reg 0x24: [mem 0xbbeffc00-0xbbefffff]

[    0.103089] pci 0000:00:1f.2: PME# supported from D3hot

[    0.103238] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500

[    0.103299] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]

[    0.103523] pci 0000:03:00.0: [10de:0401] type 00 class 0x030000

[    0.103545] pci 0000:03:00.0: reg 0x10: [mem 0xbf000000-0xbfffffff]

[    0.103558] pci 0000:03:00.0: reg 0x14: [mem 0xc0000000-0xdfffffff 64bit pref]

[    0.103570] pci 0000:03:00.0: reg 0x1c: [mem 0xbc000000-0xbdffffff 64bit]

[    0.103579] pci 0000:03:00.0: reg 0x24: [io  0xe800-0xe87f]

[    0.103588] pci 0000:03:00.0: reg 0x30: [mem 0xbefe0000-0xbeffffff pref]

[    0.103596] pci 0000:03:00.0: enabling Extended Tags

[    0.112021] pci 0000:00:01.0: PCI bridge to [bus 03]

[    0.112026] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]

[    0.112030] pci 0000:00:01.0:   bridge window [mem 0xbc000000-0xbfffffff]

[    0.112035] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xefffffff 64bit pref]

[    0.112102] pci 0000:00:1c.0: PCI bridge to [bus 02]

[    0.112107] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]

[    0.112174] pci 0000:01:01.0: [1102:0007] type 00 class 0x040100

[    0.112198] pci 0000:01:01.0: reg 0x10: [io  0xa800-0xa81f]

[    0.112290] pci 0000:01:01.0: supports D1 D2

[    0.112357] pci 0000:01:04.0: [1283:8211] type 00 class 0x018000

[    0.112381] pci 0000:01:04.0: reg 0x10: [io  0xc400-0xc407]

[    0.112392] pci 0000:01:04.0: reg 0x14: [io  0xc000-0xc003]

[    0.112402] pci 0000:01:04.0: reg 0x18: [io  0xb800-0xb807]

[    0.112413] pci 0000:01:04.0: reg 0x1c: [io  0xb400-0xb403]

[    0.112423] pci 0000:01:04.0: reg 0x20: [io  0xb000-0xb00f]

[    0.112443] pci 0000:01:04.0: reg 0x30: [mem 0xbbfa0000-0xbbfbffff pref]

[    0.112543] pci 0000:01:05.0: [11ab:4320] type 00 class 0x020000

[    0.112568] pci 0000:01:05.0: reg 0x10: [mem 0xbbffc000-0xbbffffff]

[    0.112579] pci 0000:01:05.0: reg 0x14: [io  0xc800-0xc8ff]

[    0.112625] pci 0000:01:05.0: reg 0x30: [mem 0xbbfc0000-0xbbfdffff pref]

[    0.112672] pci 0000:01:05.0: supports D1 D2

[    0.112675] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.112773] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)

[    0.112778] pci 0000:00:1e.0:   bridge window [io  0xa000-0xcfff]

[    0.112782] pci 0000:00:1e.0:   bridge window [mem 0xbbf00000-0xbbffffff]

[    0.112790] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)

[    0.112792] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)

[    0.112795] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)

[    0.112798] pci 0000:00:1e.0:   bridge window [mem 0x80010000-0xffffffff window] (subtractive decode)

[    0.114980] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)

[    0.115155] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)

[    0.115327] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)

[    0.115499] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)

[    0.115671] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)

[    0.115843] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)

[    0.116027] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)

[    0.116197] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)

[    0.116851] SCSI subsystem initialized

[    0.116886] libata version 3.00 loaded.

[    0.116886] pci 0000:03:00.0: vgaarb: setting as boot VGA device

[    0.116886] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none

[    0.116886] pci 0000:03:00.0: vgaarb: bridge control possible

[    0.116886] vgaarb: loaded

[    0.116886] ACPI: bus type USB registered

[    0.116886] usbcore: registered new interface driver usbfs

[    0.116886] usbcore: registered new interface driver hub

[    0.116886] usbcore: registered new device driver usb

[    0.116886] EDAC MC: Ver: 3.0.0

[    0.116886] PCI: Using ACPI for IRQ routing

[    0.116886] PCI: pci_cache_line_size set to 64 bytes

[    0.116886] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]

[    0.116886] e820: reserve RAM buffer [mem 0x7ff80000-0x7fffffff]

[    0.116912] NetLabel: Initializing

[    0.116914] NetLabel:  domain hash size = 128

[    0.116915] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO

[    0.116940] NetLabel:  unlabeled traffic allowed by default

[    0.116981] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns

[    0.116981] hpet clockevent registered

[    0.116981] HPET: 3 timers in total, 0 timers will be used for per-cpu timer

[    0.116981] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0

[    0.116981] hpet0: 3 comparators, 64-bit 14.318180 MHz counter

[    0.121032] clocksource: Switched to clocksource hpet

[    0.143859] VFS: Disk quotas dquot_6.6.0

[    0.143890] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[    0.144125] AppArmor: AppArmor Filesystem Enabled

[    0.144184] pnp: PnP ACPI init

[    0.144346] system 00:00: [mem 0xfed13000-0xfed19fff] has been reserved

[    0.144358] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)

[    0.144450] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)

[    0.145189] pnp 00:02: [dma 2]

[    0.145283] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)

[    0.146108] pnp 00:03: [dma 3]

[    0.146376] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active)

[    0.146512] system 00:04: [io  0x0290-0x0297] has been reserved

[    0.146521] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.147013] system 00:05: [io  0x04d0-0x04d1] has been reserved

[    0.147016] system 00:05: [io  0x0800-0x087f] has been reserved

[    0.147019] system 00:05: [io  0x0400-0x041f] has been reserved

[    0.147022] system 00:05: [io  0x0480-0x04bf] has been reserved

[    0.147025] system 00:05: [io  0x0900-0x091f] has been reserved

[    0.147028] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved

[    0.147031] system 00:05: [mem 0xfed20000-0xfed8ffff] has been reserved

[    0.147034] system 00:05: [mem 0xffb00000-0xffbfffff] has been reserved

[    0.147037] system 00:05: [mem 0xfff00000-0xffffffff] has been reserved

[    0.147047] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.147486] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved

[    0.147489] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved

[    0.147499] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.148613] pnp 00:07: [dma 0 disabled]

[    0.148734] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)

[    0.148876] system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved

[    0.148885] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.149293] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved

[    0.149297] system 00:09: [mem 0x000c0000-0x000dffff] could not be reserved

[    0.149299] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved

[    0.149302] system 00:09: [mem 0x00100000-0x7fffffff] could not be reserved

[    0.149312] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)

[    0.149676] pnp: PnP ACPI: found 10 devices

[    0.158281] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns

[    0.158314] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000

[    0.158318] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000

[    0.158341] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80100000-0x802fffff]

[    0.158348] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80300000-0x804fffff 64bit pref]

[    0.158352] pci 0000:00:01.0: PCI bridge to [bus 03]

[    0.158356] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]

[    0.158361] pci 0000:00:01.0:   bridge window [mem 0xbc000000-0xbfffffff]

[    0.158364] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xefffffff 64bit pref]

[    0.158370] pci 0000:00:1c.0: PCI bridge to [bus 02]

[    0.158373] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]

[    0.158378] pci 0000:00:1c.0:   bridge window [mem 0x80100000-0x802fffff]

[    0.158383] pci 0000:00:1c.0:   bridge window [mem 0x80300000-0x804fffff 64bit pref]

[    0.158391] pci 0000:00:1e.0: PCI bridge to [bus 01]

[    0.158394] pci 0000:00:1e.0:   bridge window [io  0xa000-0xcfff]

[    0.158399] pci 0000:00:1e.0:   bridge window [mem 0xbbf00000-0xbbffffff]

[    0.158409] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]

[    0.158412] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]

[    0.158414] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]

[    0.158416] pci_bus 0000:00: resource 7 [mem 0x80010000-0xffffffff window]

[    0.158419] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]

[    0.158421] pci_bus 0000:03: resource 1 [mem 0xbc000000-0xbfffffff]

[    0.158424] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xefffffff 64bit pref]

[    0.158426] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]

[    0.158428] pci_bus 0000:02: resource 1 [mem 0x80100000-0x802fffff]

[    0.158431] pci_bus 0000:02: resource 2 [mem 0x80300000-0x804fffff 64bit pref]

[    0.158433] pci_bus 0000:01: resource 0 [io  0xa000-0xcfff]

[    0.158436] pci_bus 0000:01: resource 1 [mem 0xbbf00000-0xbbffffff]

[    0.158438] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7 window]

[    0.158440] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff window]

[    0.158443] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]

[    0.158445] pci_bus 0000:01: resource 7 [mem 0x80010000-0xffffffff window]

[    0.158582] NET: Registered protocol family 2

[    0.158958] TCP established hash table entries: 32768 (order: 6, 262144 bytes)

[    0.159075] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)

[    0.159237] TCP: Hash tables configured (established 32768 bind 32768)

[    0.159341] UDP hash table entries: 2048 (order: 4, 65536 bytes)

[    0.159375] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)

[    0.159504] NET: Registered protocol family 1

[    0.160815] pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]

[    0.160827] PCI: CLS 16 bytes, default 64

[    0.160920] Unpacking initramfs...

[    1.454719] Freeing initrd memory: 49724K

[    1.454812] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)

[    1.454818] software IO TLB [mem 0x7bf80000-0x7ff80000] (64MB) mapped at [000000004177d690-00000000a1e6acd9]

[    1.455019] Scanning for low memory corruption every 60 seconds

[    1.456086] Initialise system trusted keyrings

[    1.456102] Key type blacklist registered

[    1.456199] workingset: timestamp_bits=36 max_order=20 bucket_order=0

[    1.458774] zbud: loaded

[    1.459744] squashfs: version 4.0 (2009/01/31) Phillip Lougher

[    1.460112] fuse init (API version 7.26)

[    1.463031] Key type asymmetric registered

[    1.463035] Asymmetric key parser 'x509' registered

[    1.463124] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)

[    1.463194] io scheduler noop registered

[    1.463196] io scheduler deadline registered

[    1.463292] io scheduler cfq registered (default)

[    1.464419] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0

[    1.464438] ACPI: Power Button [PWRB]

[    1.464516] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1

[    1.464563] ACPI: Power Button [PWRF]

[    1.465171] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled

[    1.485672] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A

[    1.489835] Linux agpgart interface v0.103

[    1.492812] loop: module loaded

[    1.493069] ata_piix 0000:00:1f.1: version 2.13

[    1.495396] scsi host0: ata_piix

[    1.495574] scsi host1: ata_piix

[    1.495649] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14

[    1.495652] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15

[    1.495913] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]

[    1.496494] scsi host2: ata_piix

[    1.496664] scsi host3: ata_piix

[    1.496741] ata3: SATA max UDMA/133 cmd 0x9800 ctl 0x9400 bmdma 0x8400 irq 23

[    1.496743] ata4: SATA max UDMA/133 cmd 0x9000 ctl 0x8800 bmdma 0x8408 irq 23

[    1.497053] libphy: Fixed MDIO Bus: probed

[    1.497055] tun: Universal TUN/TAP device driver, 1.6

[    1.497151] PPP generic driver version 2.4.2

[    1.497246] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    1.497254] ehci-pci: EHCI PCI platform driver

[    1.497485] ehci-pci 0000:00:1d.7: EHCI Host Controller

[    1.497497] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1

[    1.497513] ehci-pci 0000:00:1d.7: debug port 1

[    1.501436] ehci-pci 0000:00:1d.7: cache line size of 16 is not supported

[    1.501459] ehci-pci 0000:00:1d.7: irq 20, io mem 0xbbeff800

[    1.516031] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00

[    1.516117] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[    1.516120] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    1.516123] usb usb1: Product: EHCI Host Controller

[    1.516125] usb usb1: Manufacturer: Linux 4.15.0-21deepin-generic ehci_hcd

[    1.516127] usb usb1: SerialNumber: 0000:00:1d.7

[    1.516340] hub 1-0:1.0: USB hub found

[    1.516354] hub 1-0:1.0: 8 ports detected

[    1.516695] ehci-platform: EHCI generic platform driver

[    1.516718] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[    1.516725] ohci-pci: OHCI PCI platform driver

[    1.516747] ohci-platform: OHCI generic platform driver

[    1.516761] uhci_hcd: USB Universal Host Controller Interface driver

[    1.516930] uhci_hcd 0000:00:1d.0: UHCI Host Controller

[    1.516939] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2

[    1.516948] uhci_hcd 0000:00:1d.0: detected 2 ports

[    1.516971] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00007000

[    1.517058] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001

[    1.517061] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    1.517063] usb usb2: Product: UHCI Host Controller

[    1.517065] usb usb2: Manufacturer: Linux 4.15.0-21deepin-generic uhci_hcd

[    1.517068] usb usb2: SerialNumber: 0000:00:1d.0

[    1.517258] hub 2-0:1.0: USB hub found

[    1.517271] hub 2-0:1.0: 2 ports detected

[    1.517626] uhci_hcd 0000:00:1d.1: UHCI Host Controller

[    1.517634] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3

[    1.517642] uhci_hcd 0000:00:1d.1: detected 2 ports

[    1.517676] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00007400

[    1.517762] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001

[    1.517765] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    1.517767] usb usb3: Product: UHCI Host Controller

[    1.517770] usb usb3: Manufacturer: Linux 4.15.0-21deepin-generic uhci_hcd

[    1.517772] usb usb3: SerialNumber: 0000:00:1d.1

[    1.517958] hub 3-0:1.0: USB hub found

[    1.517970] hub 3-0:1.0: 2 ports detected

[    1.518292] uhci_hcd 0000:00:1d.2: UHCI Host Controller

[    1.518306] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4

[    1.518316] uhci_hcd 0000:00:1d.2: detected 2 ports

[    1.518348] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00007800

[    1.518431] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001

[    1.518434] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    1.518437] usb usb4: Product: UHCI Host Controller

[    1.518439] usb usb4: Manufacturer: Linux 4.15.0-21deepin-generic uhci_hcd

[    1.518441] usb usb4: SerialNumber: 0000:00:1d.2

[    1.518640] hub 4-0:1.0: USB hub found

[    1.518653] hub 4-0:1.0: 2 ports detected

[    1.518994] uhci_hcd 0000:00:1d.3: UHCI Host Controller

[    1.519002] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5

[    1.519011] uhci_hcd 0000:00:1d.3: detected 2 ports

[    1.519046] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00008000

[    1.519128] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001

[    1.519131] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    1.519134] usb usb5: Product: UHCI Host Controller

[    1.519136] usb usb5: Manufacturer: Linux 4.15.0-21deepin-generic uhci_hcd

[    1.519138] usb usb5: SerialNumber: 0000:00:1d.3

[    1.519319] hub 5-0:1.0: USB hub found

[    1.519331] hub 5-0:1.0: 2 ports detected

[    1.519629] i8042: PNP: No PS/2 controller found.

[    1.519630] i8042: Probing ports directly.

[    1.522067] serio: i8042 KBD port at 0x60,0x64 irq 1

[    1.522076] serio: i8042 AUX port at 0x60,0x64 irq 12

[    1.522329] mousedev: PS/2 mouse device common for all mice

[    1.522654] rtc_cmos 00:01: RTC can wake from S4

[    1.522818] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0

[    1.522849] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs

[    1.522867] i2c /dev entries driver

[    1.522975] device-mapper: uevent: version 1.0.3

[    1.523108] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com

[    1.523147] ledtrig-cpu: registered to indicate activity on CPUs

[    1.523741] NET: Registered protocol family 10

[    1.531212] Segment Routing with IPv6

[    1.531254] NET: Registered protocol family 17

[    1.531345] Key type dns_resolver registered

[    1.531669] RAS: Correctable Errors collector initialized.

[    1.531737] microcode: sig=0xf49, pf=0x10, revision=0x3

[    1.531816] microcode: Microcode Update Driver: v2.2.

[    1.531839] sched_clock: Marking stable (1531805928, 0)->(1636136824, -104330896)

[    1.532206] registered taskstats version 1

[    1.532236] Loading compiled-in X.509 certificates

[    1.537236] Loaded X.509 cert 'Build time autogenerated kernel key: 958c1de384c42d9479a5269a5637284f6aa8c75f'

[    1.537285] zswap: loaded using pool lzo/zbud

[    1.544342] Key type big_key registered

[    1.544350] Key type trusted registered

[    1.547637] Key type encrypted registered

[    1.547645] AppArmor: AppArmor sha1 policy hashing enabled

[    1.547649] ima: No TPM chip found, activating TPM-bypass! (rc=-19)

[    1.547687] evm: HMAC attrs: 0x1

[    1.548091]   Magic number: 6:19:154

[    1.548254] rtc_cmos 00:01: setting system clock to 2018-06-04 01:11:44 UTC (1528074704)

[    1.548447] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found

[    1.548448] EDD information not available.

[    1.674457] ata4.01: NODEV after polling detection

[    1.696152] ata4.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN01, max UDMA/100

[    1.720150] ata4.00: configured for UDMA/100

[    1.722615] ata3.00: HPA detected: current 312579695, native 312581808

[    1.722620] ata3.00: ATA-7: MAXTOR STM3160815AS, 4.AAB, max UDMA/133

[    1.722622] ata3.00: 312579695 sectors, multi 16: LBA48 NCQ (depth 0/32)

[    1.722761] ata3.01: ATA-7: SAMSUNG HD161GJ, 1AC01118, max UDMA7

[    1.722763] ata3.01: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)

[    1.797581] ata3.00: configured for UDMA/133

[    1.816272] ata3.01: configured for UDMA/133

[    1.816544] scsi 2:0:0:0: Direct-Access     ATA      MAXTOR STM316081 B    PQ: 0 ANSI: 5

[    1.816962] sd 2:0:0:0: Attached scsi generic sg0 type 0

[    1.817006] sd 2:0:0:0: [sda] 312579695 512-byte logical blocks: (160 GB/149 GiB)

[    1.817068] sd 2:0:0:0: [sda] Write Protect is off

[    1.817073] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00

[    1.817130] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    1.817325] scsi 2:0:1:0: Direct-Access     ATA      SAMSUNG HD161GJ  1118 PQ: 0 ANSI: 5

[    1.817798] sd 2:0:1:0: Attached scsi generic sg1 type 0

[    1.817851] sd 2:0:1:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)

[    1.817886] sd 2:0:1:0: [sdb] Write Protect is off

[    1.817890] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00

[    1.818267] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    1.821483] scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH22NS50  TN01 PQ: 0 ANSI: 5

[    1.846331]  sda: sda1

[    1.883843] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray

[    1.883846] cdrom: Uniform CD-ROM driver Revision: 3.20

[    1.884090] sr 3:0:0:0: Attached scsi CD-ROM sr0

[    1.884227] sr 3:0:0:0: Attached scsi generic sg2 type 5

[    1.885067] sd 2:0:0:0: [sda] Attached SCSI disk

[    1.885544]  sdb: sdb1 sdb2 sdb3

[    1.886278] sd 2:0:1:0: [sdb] Attached SCSI disk

[    1.893728] Freeing unused kernel memory: 2404K

[    1.893731] Write protecting the kernel read-only data: 20480k

[    1.895182] Freeing unused kernel memory: 2008K

[    1.903037] Freeing unused kernel memory: 1920K

[    1.915456] x86/mm: Checked W+X mappings: passed, no W+X pages found.

[    1.915457] x86/mm: Checking user space page tables

[    1.927648] x86/mm: Checked W+X mappings: passed, no W+X pages found.

[    1.988030] usb 2-1: new low-speed USB device number 2 using uhci_hcd

[    2.134330] Floppy drive(s): fd0 is 1.44M

[    2.155809] FDC 0 is a post-1991 82077

[    2.168943] pata_it821x: controller in pass through mode.

[    2.176190] scsi host4: pata_it821x

[    2.182477] scsi host5: pata_it821x

[    2.182630] ata5: PATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb000 irq 19

[    2.182633] ata6: PATA max UDMA/133 cmd 0xb800 ctl 0xb400 bmdma 0xb008 irq 19

[    2.183157] skge: 1.14 addr 0xbbffc000 irq 21 chip Yukon-Lite rev 9

[    2.183548] skge 0000:01:05.0 eth0: addr 00:15:f2:37:0e:73

[    2.185061] usb 2-1: New USB device found, idVendor=10c4, idProduct=8105

[    2.185066] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[    2.185070] usb 2-1: Product: USB OPTICAL MOUSE

[    2.185073] usb 2-1: Manufacturer: YSPRINGTECH

[    2.209933] ACPI Warning: SystemIO range 0x0000000000000400-0x000000000000041F conflicts with OpRegion 0x0000000000000400-0x000000000000040F (\_SB.PCI0.SBRG.ASOC.SMRG) (20170831/utaddress-247)

[    2.209949] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[    2.299510] nouveau 0000:03:00.0: NVIDIA G84 (084100a2)

[    2.384734] skge 0000:01:05.0 enp1s5: renamed from eth0

[    2.398039] hidraw: raw HID events driver (C) Jiri Kosina

[    2.411676] nouveau 0000:03:00.0: bios: version 60.84.43.00.81

[    2.428620] usbcore: registered new interface driver usbhid

[    2.428624] usbhid: USB HID core driver

[    2.433030] input: YSPRINGTECH USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/0003:10C4:8105.0001/input/input5

[    2.433268] hid-generic 0003:10C4:8105.0001: input,hidraw0: USB HID v1.11 Mouse [YSPRINGTECH USB OPTICAL MOUSE] on usb-0000:00:1d.0-1/input0

[    2.437934] nouveau 0000:03:00.0: bios: M0203T not found

[    2.437940] nouveau 0000:03:00.0: bios: M0203E not matched!

[    2.437945] nouveau 0000:03:00.0: fb: 512 MiB DDR2

[    2.460002] tsc: Refined TSC clocksource calibration: 3010.652 MHz

[    2.460013] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b6593b0bd2, max_idle_ns: 440795216538 ns

[    2.530433] [TTM] Zone  kernel: Available graphics memory: 2019640 kiB

[    2.530436] [TTM] Initializing pool allocator

[    2.530444] [TTM] Initializing DMA pool allocator

[    2.530476] nouveau 0000:03:00.0: DRM: VRAM: 512 MiB

[    2.530479] nouveau 0000:03:00.0: DRM: GART: 1048576 MiB

[    2.530485] nouveau 0000:03:00.0: DRM: TMDS table version 2.0

[    2.530488] nouveau 0000:03:00.0: DRM: DCB version 4.0

[    2.530492] nouveau 0000:03:00.0: DRM: DCB outp 00: 02000300 00000028

[    2.530496] nouveau 0000:03:00.0: DRM: DCB outp 01: 04011310 00020030

[    2.530498] nouveau 0000:03:00.0: DRM: DCB outp 02: 02011312 00020030

[    2.530501] nouveau 0000:03:00.0: DRM: DCB outp 03: 010223f1 00c0c080

[    2.530504] nouveau 0000:03:00.0: DRM: DCB conn 00: 1000

[    2.530506] nouveau 0000:03:00.0: DRM: DCB conn 01: 2130

[    2.530509] nouveau 0000:03:00.0: DRM: DCB conn 02: 0210

[    2.530511] nouveau 0000:03:00.0: DRM: DCB conn 03: 0211

[    2.530513] nouveau 0000:03:00.0: DRM: DCB conn 04: 0213

[    2.541160] nouveau 0000:03:00.0: DRM: failed to create encoder 0/1/0: -19

[    2.541165] nouveau 0000:03:00.0: DRM: TV-1 has no encoders, removing

[    2.541254] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).

[    2.541256] [drm] Driver supports precise vblank timestamp query.

[    2.616030] usb 1-2: new high-speed USB device number 3 using ehci-pci

[    2.788996] usb 1-2: New USB device found, idVendor=0cf3, idProduct=9271

[    2.789000] usb 1-2: New USB device strings: Mfr=16, Product=32, SerialNumber=48

[    2.789002] usb 1-2: Product: USB2.0 WLAN

[    2.789004] usb 1-2: Manufacturer: ATHEROS

[    2.789006] usb 1-2: SerialNumber: 12345

[    2.793952] nouveau 0000:03:00.0: DRM: MM: using CRYPT for buffer copies

[    2.837960] nouveau 0000:03:00.0: DRM: allocated 1600x900 fb: 0x70000, bo 000000009d9f759b

[    2.840343] fbcon: nouveaufb (fb0) is primary device

[    2.997743] Console: switching to colour frame buffer device 200x56

[    3.014401] nouveau 0000:03:00.0: fb0: nouveaufb frame buffer device

[    3.028031] [drm] Initialized nouveau 1.3.1 20120801 for 0000:03:00.0 on minor 0

[    3.060017] usb 3-1: new low-speed USB device number 2 using uhci_hcd

[    3.257511] usb 3-1: New USB device found, idVendor=1c4f, idProduct=0002

[    3.257515] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[    3.257517] usb 3-1: Product: USB Keyboard

[    3.257519] usb 3-1: Manufacturer: SIGMACHIP

[    3.274050] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/0003:1C4F:0002.0002/input/input6

[    3.332274] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1d.1-1/input0

[    3.345102] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/0003:1C4F:0002.0003/input/input7

[    3.404232] hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:1d.1-1/input1

[    3.484123] clocksource: Switched to clocksource tsc

[    3.932007] raid6: sse2x1   gen()  2071 MB/s

[    3.980003] raid6: sse2x1   xor()  1644 MB/s

[    4.027988] raid6: sse2x2   gen()  2241 MB/s

[    4.075999] raid6: sse2x2   xor()  1890 MB/s

[    4.123998] raid6: sse2x4   gen()  2866 MB/s

[    4.171999] raid6: sse2x4   xor()  1766 MB/s

[    4.172002] raid6: using algorithm sse2x4 gen() 2866 MB/s

[    4.172003] raid6: .... xor() 1766 MB/s, rmw enabled

[    4.172005] raid6: using intx1 recovery algorithm

[    4.174247] xor: measuring software checksum speed

[    4.211991]    prefetch64-sse:  5439.000 MB/sec

[    4.251988]    generic_sse:  5420.000 MB/sec

[    4.251990] xor: using function: prefetch64-sse (5439.000 MB/sec)

[    4.254125] async_tx: api initialized (async)

[    5.382936] Btrfs loaded, crc32c=crc32c-generic

[   18.364606] print_req_error: I/O error, dev fd0, sector 0

[   18.364615] floppy: error 10 while reading block 0

[   18.384282] random: crng init done

[   18.390173] PM: Starting manual resume from disk

[   18.390403] PM: Image not found (code -22)

[   18.563951] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)

[   19.779863] ip_tables: (C) 2000-2006 Netfilter Core Team

[   19.868277] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)

[   19.868579] systemd[1]: Detected architecture x86-64.

[   19.881761] systemd[1]: Set hostname to <ivanete-PC>.

[   21.409272] systemd[1]: Listening on udev Control Socket.

[   21.409489] systemd[1]: Listening on LVM2 poll daemon socket.

[   21.409518] systemd[1]: Reached target User and Group Name Lookups.

[   21.409623] systemd[1]: Listening on Journal Socket (/dev/log).

[   21.409648] systemd[1]: Reached target Remote File Systems.

[   21.409757] systemd[1]: Listening on Device-mapper event daemon FIFOs.

[   21.409833] systemd[1]: Listening on LVM2 metadata daemon socket.

[   21.762370] vfs_monitor: loading out-of-tree module taints kernel.

[   21.762455] vfs_monitor: module verification failed: signature and/or required key missing - tainting kernel

[   21.763165] mp: /, major: 8, minor: 17

[   21.763170] partition count: 1, comm[302]: systemd-modules, path: /lib/systemd/systemd-modules-load, cmdline: /lib/systemd/systemd-modules-load

[   21.885839] EXT4-fs (sdb1): re-mounted. Opts: data=ordered

[   21.918595] register_kretprobes 10 ok

[   22.127060] systemd-journald[298]: Received request to flush runtime journal from PID 1

[   22.855007] lp: driver loaded but no devices found

[   22.938789] ppdev: user-space parallel port driver

[   22.960250] parport_pc 00:03: reported by Plug and Play ACPI

[   22.960395] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]

[   23.056194] lp0: using parport0 (interrupt-driven).

[   23.132391] bbswitch: version 0.8

[   23.132409] bbswitch: cannot find ACPI handle for VGA device 0000:03:00.0

[   23.132413] bbswitch: No discrete VGA device found

[   23.532189] intel_rng: FWH not detected

[   23.701807] ATK0110 ATK0110:00: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().

[   23.825174] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[   23.874807] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004BF (\_SB.PCI0.SBRG.GPIO) (20170831/utaddress-247)

[   23.874822] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[   23.874826] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004BF (\_SB.PCI0.SBRG.GPIO) (20170831/utaddress-247)

[   23.874837] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[   23.874838] lpc_ich: Resource conflict(s) found affecting gpio_ich

[   23.937716] leds_ss4200: no LED devices found

[   25.029677] snd_hda_codec_realtek hdaudioC0D0: ALC882: SKU not ready 0x411111f0

[   25.030267] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC882: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line

[   25.030272] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)

[   25.030276] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)

[   25.030279] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0

[   25.030282] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0

[   25.030285] snd_hda_codec_realtek hdaudioC0D0:    inputs:

[   25.030290] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18

[   25.030293] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19

[   25.030297] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a

[   25.030300] snd_hda_codec_realtek hdaudioC0D0:      CD=0x1c

[   25.050182] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8

[   25.050344] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9

[   25.050487] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10

[   25.050628] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11

[   25.050770] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12

[   25.050913] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13

[   25.051060] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14

[   25.051200] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15

[   25.305500] cfg80211: Loading compiled-in X.509 certificates for regulatory database

[   25.311178] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'

[   25.391875] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2

[   25.391882] cfg80211: failed to load regulatory.db

[   25.653633] snd_ca0106 0000:01:01.0: Model 100a Rev 00000000 Serial 100a1102

[   25.952074] usb 1-2: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested

[   25.952280] usbcore: registered new interface driver ath9k_htc

[   26.147847] input: PC Speaker as /devices/platform/pcspkr/input/input16

[   26.196740] Error: Driver 'pcspkr' is already registered, aborting...

[   26.360448] bbswitch: version 0.8

[   26.360469] bbswitch: cannot find ACPI handle for VGA device 0000:03:00.0

[   26.360474] bbswitch: No discrete VGA device found

[   26.480277] usb 1-2: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008

[   26.490636] Adding 11301884k swap on /dev/sdb2.  Priority:-2 extents:1 across:11301884k FS

[   26.732757] ath9k_htc 1-2:1.0: ath9k_htc: HTC initialized with 33 credits

[   26.999885] ath9k_htc 1-2:1.0: ath9k_htc: FW Version: 1.4

[   26.999890] ath9k_htc 1-2:1.0: FW RMW support: On

[   26.999892] ath: EEPROM regdomain: 0x809c

[   26.999894] ath: EEPROM indicates we should expect a country code

[   26.999895] ath: doing EEPROM country->regdmn map search

[   26.999897] ath: country maps to regdmn code: 0x52

[   26.999898] ath: Country alpha2 being used: CN

[   26.999900] ath: Regpair used: 0x52

[   27.036963] ieee80211 phy0: Atheros AR9271 Rev:1

[   28.159807] ath9k_htc 1-2:1.0 wlxc04a0020bad8: renamed from wlan0

[   28.944370] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: data=ordered

[   28.944422] partition /home [8, 19] added, comm[404]: mount

[   35.688757] IPv6: ADDRCONF(NETDEV_UP): enp1s5: link is not ready

[   35.688977] skge 0000:01:05.0 enp1s5: enabling interface

[   35.692284] IPv6: ADDRCONF(NETDEV_UP): enp1s5: link is not ready

[   35.732971] IPv6: ADDRCONF(NETDEV_UP): wlxc04a0020bad8: link is not ready

[   35.920968] IPv6: ADDRCONF(NETDEV_UP): wlxc04a0020bad8: link is not ready

[   38.164929] IPv6: ADDRCONF(NETDEV_UP): wlxc04a0020bad8: link is not ready

[   40.929207] wlxc04a0020bad8: authenticate with 90:8d:78:61:e4:e0

[   41.215853] wlxc04a0020bad8: send auth to 90:8d:78:61:e4:e0 (try 1/3)

[   41.217587] wlxc04a0020bad8: authenticated

[   41.224065] wlxc04a0020bad8: associate with 90:8d:78:61:e4:e0 (try 1/3)

[   41.229688] wlxc04a0020bad8: RX AssocResp from 90:8d:78:61:e4:e0 (capab=0x411 status=0 aid=3)

[   41.238408] wlxc04a0020bad8: associated

[   41.444219] IPv6: ADDRCONF(NETDEV_CHANGE): wlxc04a0020bad8: link becomes ready

[   43.330405] NET: Registered protocol family 15

[   44.750504] Initializing XFRM netlink socket

[   62.660882] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)

[   62.672794] partition /media/ivanete/12bcce66-f0f0-4482-9896-8a00c62c3ba8 [8, 1] added, comm[892]: mount

[   71.259360] nouveau 0000:03:00.0: Direct firmware load for nouveau/nv84_xuc00f failed with error -2

[   71.259370] nouveau 0000:03:00.0: vp: unable to load firmware nouveau/nv84_xuc00f

[   71.259374] nouveau 0000:03:00.0: vp: init failed, -2

[   71.259438] nouveau 0000:03:00.0: Direct firmware load for nouveau/nv84_xuc103 failed with error -2

[   71.259442] nouveau 0000:03:00.0: bsp: unable to load firmware nouveau/nv84_xuc103

[   71.259446] nouveau 0000:03:00.0: bsp: init failed, -2

[   74.837872] print_req_error: I/O error, dev fd0, sector 0

[   74.837881] floppy: error 10 while reading block 0

[   87.091910] print_req_error: I/O error, dev fd0, sector 0

[   87.091919] floppy: error 10 while reading block 0

[   99.161755] nouveau 0000:03:00.0: Direct firmware load for nouveau/nv84_xuc00f failed with error -2

[   99.161763] nouveau 0000:03:00.0: vp: unable to load firmware nouveau/nv84_xuc00f

[   99.161768] nouveau 0000:03:00.0: vp: init failed, -2

[   99.161834] nouveau 0000:03:00.0: Direct firmware load for nouveau/nv84_xuc103 failed with error -2

[   99.161840] nouveau 0000:03:00.0: bsp: unable to load firmware nouveau/nv84_xuc103

[   99.161843] nouveau 0000:03:00.0: bsp: init failed, -2

[  642.303861] nouveau 0000:03:00.0: therm: temperature (90 C) hit the 'fanboost' threshold

[  643.365544] nouveau 0000:03:00.0: therm: temperature (86 C) went below the 'fanboost' threshold

[ 1470.941314] perf: interrupt took too long (2535 > 2500), lowering kernel.perf_event_max_sample_rate to 78750

[ 2086.074643] perf: interrupt took too long (3188 > 3168), lowering kernel.perf_event_max_sample_rate to 62500

[ 2350.435796] nouveau 0000:03:00.0: Direct firmware load for nouveau/nv84_xuc00f failed with error -2

[ 2350.435803] nouveau 0000:03:00.0: vp: unable to load firmware nouveau/nv84_xuc00f

[ 2350.435807] nouveau 0000:03:00.0: vp: init failed, -2

[ 2350.435860] nouveau 0000:03:00.0: Direct firmware load for nouveau/nv84_xuc103 failed with error -2

[ 2350.435863] nouveau 0000:03:00.0: bsp: unable to load firmware nouveau/nv84_xuc103

[ 2350.435866] nouveau 0000:03:00.0: bsp: init failed, -2

[ 2350.622241] nouveau 0000:03:00.0: Direct firmware load for nouveau/nv84_xuc00f failed with error -2

[ 2350.622250] nouveau 0000:03:00.0: vp: unable to load firmware nouveau/nv84_xuc00f

[ 2350.622254] nouveau 0000:03:00.0: vp: init failed, -2

[ 2350.622316] nouveau 0000:03:00.0: Direct firmware load for nouveau/nv84_xuc103 failed with error -2

[ 2350.622321] nouveau 0000:03:00.0: bsp: unable to load firmware nouveau/nv84_xuc103

[ 2350.622324] nouveau 0000:03:00.0: bsp: init failed, -2

[ 2406.221155] perf: interrupt took too long (3995 > 3985), lowering kernel.perf_event_max_sample_rate to 50000

[ 2701.841681] print_req_error: I/O error, dev fd0, sector 0

[ 2701.841690] floppy: error 10 while reading block 0

[ 2714.121306] print_req_error: I/O error, dev fd0, sector 0

[ 2714.121318] floppy: error 10 while reading block 0

[ 3029.822285] sys_umount: /media/cdrom, 8, 17

ivanete@ivanete-PC:~$