Não Consigo Instalar Nenhuma Distribuição [RESOLVIDO]

Guiazsan
(usa Deepin)

Enviado em 25/06/2018 - 22:10h

Boa Noite, sou novo neste forum, e estou com um problema, meu Windows deu erro no boot, após isso eu usei um live do kali em pen drive pra poder recuperar meus arquivos preciosos, após isso, resolvi instalar o linux como OS principal, tentei instalar o Deepin cada vez que eu tentava acontecei ou um erro durante a instalação, ou após dar o primeiro boot do sistema já instalado, toquei o criador de live, porém não resolveu.

Dos erros causados, foram, Kernel panic, outras vezes a tela do GRUB travava, outras trazia os status do boot enquanto "bootava", porém travava em algum momento.

Após isso, tentei instalar o Debian 8, e tive problema de Kernel panic também.

Já testei com o Legacy ativado e desativado, o modo UEFI também ativado e desativado.

Meu notebook é o HP Probook 6460b, 4GB de RAM, Core i3 segunda geração, e Intel HD Graphics 3000.

Aguardo respostas por favor.
Obrigado.

Mauriciodez
(usa Debian)

Enviado em 25/06/2018 - 22:25h

Muito provavelmente seu hd tá indo para o espaço .. é uma de vc fazer um teste de superfície para verificar a saúde do bichano !!!

------------------------------------------| Linux User #621728 |-----------------------------------------

" Nem sempre é amigo aquele que te tira do buraco !!! ( Saddam Hussein )"

------------------------------------------| Linux User #621728 |-----------------------------------------

albfneto
(usa openSUSE)

Enviado em 25/06/2018 - 22:30h

sou da mesma opinião que o maurício, porque vc está tendo problemas em todos os linux, e tb no windows, Só que seu micro tem UEFI, ele é novo, e portanto seu HD não é velho.

vc chegou os cabos? oxidação ou sujeira nos contatos dos pentes de memória?

tente uma coisa... pegue um live CD ou DVD ou pendrive de boot linux, dá boot com ele e poste aqui uma imagem do seu Gparted,
vamos ver como suas partições estão.
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨
Albfneto,
Ribeirão Preto, S.P., Brasil.
Usuário Linux, Linux Counter: #479903.
Distros Favoritas: Sabayon, Gentoo, openSUSE, Mageia e OpenMandriva.

removido
(usa Nenhuma)

Enviado em 25/06/2018 - 23:08h

Jeito de problemas de hardware. Provavelmente HD. Sugiro levar para avaliação técnica de confiança.

Guiazsan
(usa Deepin)

Enviado em 25/06/2018 - 23:25h

Obrigado a todos, eu vou tentar instalar mais uma distro, se eu não conseguir, então irei mandar para checarem meu HD.

Muito obrigado a todos pelas respostas.

Mauriciodez
(usa Debian)

Enviado em 25/06/2018 - 23:32h

velho ... vai pagar para checarem a saúde do HD ??? do jeito que tem pilantra vão condenar seu hd na tora só para te venderem outro .... testa vc a saúde dele, se tiver ruim, vc mesmo compra outro e vc mesmo troca , não tem mistério .

------------------------------------------| Linux User #621728 |-----------------------------------------

" Nem sempre é amigo aquele que te tira do buraco !!! ( Saddam Hussein )"

------------------------------------------| Linux User #621728 |-----------------------------------------

Guiazsan
(usa Deepin)

Enviado em 25/06/2018 - 23:55h

De boa, tenho alguem de confianca pra fazer isso por mim.

Guiazsan
(usa Deepin)

Enviado em 27/06/2018 - 12:04h

Resultado

smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.14.0-kali3-amd64] (local build)

Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org



=== START OF INFORMATION SECTION ===

Model Family:     Toshiba 2.5" HDD MK..61GSY[N]

Device Model:     TOSHIBA MK2561GSYN

Serial Number:    12R3P9AXT

LU WWN Device Id: 5 000039 3c228d6bf

Firmware Version: MH000C

User Capacity:    250,059,350,016 bytes [250 GB]

Sector Size:      512 bytes logical/physical

Rotation Rate:    7200 rpm

Form Factor:      2.5 inches

Device is:        In smartctl database [for details use: -P show]

ATA Version is:   ATA8-ACS (minor revision not indicated)

SATA Version is:  SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)

Local Time is:    Wed Jun 27 15:02:26 2018 UTC

SMART support is: Available - device has SMART capability.

SMART support is: Enabled



=== START OF READ SMART DATA SECTION ===

SMART overall-health self-assessment test result: PASSED



General SMART Values:

Offline data collection status:  (0x06)	Offline data collection activity

					was aborted by the device with a fatal error.

					Auto Offline Data Collection: Disabled.

Self-test execution status:      (  25)	The self-test routine was aborted by

					the host.

Total time to complete Offline 

data collection: 		(  120) seconds.

Offline data collection

capabilities: 			 (0x51) SMART execute Offline immediate.

					No Auto Offline data collection support.

					Suspend Offline collection upon new

					command.

					No Offline surface scan supported.

					Self-test supported.

					No Conveyance Self-test supported.

					Selective Self-test supported.

SMART capabilities:            (0x0003)	Saves SMART data before entering

					power-saving mode.

					Supports SMART auto save timer.

Error logging capability:        (0x01)	Error logging supported.

					General Purpose Logging supported.

Short self-test routine 

recommended polling time: 	 (   2) minutes.

Extended self-test routine

recommended polling time: 	 (  51) minutes.

SCT capabilities: 	       (0x003f)	SCT Status supported.

					SCT Error Recovery Control supported.

					SCT Feature Control supported.

					SCT Data Table supported.



SMART Attributes Data Structure revision number: 16

Vendor Specific SMART Attributes with Thresholds:

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE

  1 Raw_Read_Error_Rate     0x002f   100   100   050    Pre-fail  Always       -       0

  2 Throughput_Performance  0x0027   100   100   050    Pre-fail  Always       -       0

  3 Spin_Up_Time            0x0023   100   100   002    Pre-fail  Always       -       1233

  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       4790

  5 Reallocated_Sector_Ct   0x0033   018   018   010    Pre-fail  Always       -       1691

  7 Seek_Error_Rate         0x002f   100   100   050    Pre-fail  Always       -       0

  8 Seek_Time_Performance   0x0025   100   100   050    Pre-fail  Offline      -       0

  9 Power_On_Minutes        0x0032   062   062   000    Old_age   Always       -       257h+32m

 10 Spin_Retry_Count        0x0033   195   100   030    Pre-fail  Always       -       0

 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       4731

183 Runtime_Bad_Block       0x0032   100   100   001    Old_age   Always       -       8

184 End-to-End_Error        0x0033   100   100   097    Pre-fail  Always       -       0

185 Unknown_Attribute       0x0032   100   100   001    Old_age   Always       -       65535

187 Reported_Uncorrect      0x0032   001   001   000    Old_age   Always       -       10617

188 Command_Timeout         0x0032   100   099   000    Old_age   Always       -       4

189 High_Fly_Writes         0x003a   100   100   001    Old_age   Always       -       0

190 Airflow_Temperature_Cel 0x0022   071   043   040    Old_age   Always       -       29 (Min/Max 25/29)

191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       561

192 Power-Off_Retract_Count 0x0022   100   100   000    Old_age   Always       -       7209070

193 Load_Cycle_Count        0x0032   093   093   000    Old_age   Always       -       78239

196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       742

197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       356

199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0



SMART Error Log Version: 1

ATA Error Count: 11796 (device log contains only the most recent five errors)

	CR = Command Register [HEX]

	FR = Features Register [HEX]

	SC = Sector Count Register [HEX]

	SN = Sector Number Register [HEX]

	CL = Cylinder Low Register [HEX]

	CH = Cylinder High Register [HEX]

	DH = Device/Head Register [HEX]

	DC = Device Command Register [HEX]

	ER = Error register [HEX]

	ST = Status register [HEX]

Powered_Up_Time is measured from power on, and printed as

DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,

SS=sec, and sss=millisec. It "wraps" after 49.710 days.



Error 11796 occurred at disk power-on lifetime: 15451 hours (643 days + 19 hours)

  When the command that caused the error occurred, the device was active or idle.



  After command completion occurred, registers were:

  ER ST SC SN CL CH DH

  -- -- -- -- -- -- --

  40 51 09 34 52 c4 e3  Error: UNC 9 sectors at LBA = 0x03c45234 = 63197748



  Commands leading to the command that caused the error were:

  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name

  -- -- -- -- -- -- -- --  ----------------  --------------------

  25 00 3d 00 52 c4 e3 00      00:00:17.464  READ DMA EXT

  25 00 02 fe 51 c4 e3 00      00:00:17.464  READ DMA EXT

  25 00 3e c0 51 c4 e3 00      00:00:17.464  READ DMA EXT

  25 00 01 bf 51 c4 e3 00      00:00:17.464  READ DMA EXT

  25 00 3f 80 51 c4 e3 00      00:00:17.463  READ DMA EXT



Error 11795 occurred at disk power-on lifetime: 15451 hours (643 days + 19 hours)

  When the command that caused the error occurred, the device was active or idle.



  After command completion occurred, registers were:

  ER ST SC SN CL CH DH

  -- -- -- -- -- -- --

  40 51 09 34 52 c4 e3  Error: UNC 9 sectors at LBA = 0x03c45234 = 63197748



  Commands leading to the command that caused the error were:

  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name

  -- -- -- -- -- -- -- --  ----------------  --------------------

  25 00 3d 00 52 c4 e3 00      00:00:12.480  READ DMA EXT

  25 00 02 fe 51 c4 e3 00      00:00:12.479  READ DMA EXT

  25 00 3e c0 51 c4 e3 00      00:00:12.479  READ DMA EXT

  25 00 01 bf 51 c4 e3 00      00:00:12.479  READ DMA EXT

  25 00 3f 80 51 c4 e3 00      00:00:12.479  READ DMA EXT



Error 11794 occurred at disk power-on lifetime: 15451 hours (643 days + 19 hours)

  When the command that caused the error occurred, the device was active or idle.



  After command completion occurred, registers were:

  ER ST SC SN CL CH DH

  -- -- -- -- -- -- --

  40 51 09 34 52 c4 e3  Error: UNC 9 sectors at LBA = 0x03c45234 = 63197748



  Commands leading to the command that caused the error were:

  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name

  -- -- -- -- -- -- -- --  ----------------  --------------------

  25 00 3d 00 52 c4 e3 00      00:00:14.997  READ DMA EXT

  25 00 02 fe 51 c4 e3 00      00:00:14.997  READ DMA EXT

  25 00 3e c0 51 c4 e3 00      00:00:14.997  READ DMA EXT

  25 00 01 bf 51 c4 e3 00      00:00:14.996  READ DMA EXT

  25 00 3f 80 51 c4 e3 00      00:00:14.996  READ DMA EXT



Error 11793 occurred at disk power-on lifetime: 15451 hours (643 days + 19 hours)

  When the command that caused the error occurred, the device was active or idle.



  After command completion occurred, registers were:

  ER ST SC SN CL CH DH

  -- -- -- -- -- -- --

  40 51 09 34 52 c4 e3  Error: UNC 9 sectors at LBA = 0x03c45234 = 63197748



  Commands leading to the command that caused the error were:

  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name

  -- -- -- -- -- -- -- --  ----------------  --------------------

  25 00 3d 00 52 c4 e3 00      00:00:12.839  READ DMA EXT

  25 00 02 fe 51 c4 e3 00      00:00:12.838  READ DMA EXT

  25 00 3e c0 51 c4 e3 00      00:00:12.838  READ DMA EXT

  25 00 01 bf 51 c4 e3 00      00:00:12.838  READ DMA EXT

  25 00 3f 80 51 c4 e3 00      00:00:12.838  READ DMA EXT



Error 11792 occurred at disk power-on lifetime: 15451 hours (643 days + 19 hours)

  When the command that caused the error occurred, the device was active or idle.



  After command completion occurred, registers were:

  ER ST SC SN CL CH DH

  -- -- -- -- -- -- --

  40 41 da 9c bb 54 60  Error: UNC at LBA = 0x0054bb9c = 5553052



  Commands leading to the command that caused the error were:

  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name

  -- -- -- -- -- -- -- --  ----------------  --------------------

  60 08 d8 98 bb 54 40 00      01:48:36.130  READ FPDMA QUEUED

  ea 00 00 00 00 00 a0 00      01:48:36.031  FLUSH CACHE EXT

  61 10 18 50 0c 80 40 00      01:48:36.025  WRITE FPDMA QUEUED

  61 08 10 80 08 80 40 00      01:48:36.025  WRITE FPDMA QUEUED

  61 08 08 08 08 80 40 00      01:48:36.025  WRITE FPDMA QUEUED



SMART Self-test log structure revision number 1

Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error

# 1  Short offline       Aborted by host               90%     14021         -

# 2  Short offline       Completed without error       00%         3         -

# 3  Extended offline    Interrupted (host reset)      90%         2         -

# 4  Short offline       Completed without error       00%         2         -

# 5  Extended offline    Interrupted (host reset)      90%         1         -

# 6  Short offline       Completed without error       00%         1         -



SMART Selective self-test log data structure revision number 1

 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS

    1        0        0  Not_testing

    2        0        0  Not_testing

    3        0        0  Not_testing

    4        0        0  Not_testing

    5        0        0  Not_testing

Selective self-test flags (0x0):

  After scanning selected spans, do NOT read-scan remainder of disk.

If Selective self-test is pending on power-up, resume after 0 minute delay.

 

Guiazsan
(usa Deepin)

Enviado em 10/07/2018 - 12:43h

Realmente o problema foi no HD, comprei um SSD e resolveu o problema, obrigado por tudo gente.

removido
(usa Nenhuma)

Enviado em 10/07/2018 - 14:03h

Belo upgrade.
Agora vc nunca mais vai querer ter HD no PC como aconteceu comigo.
SSD é bom demais.

***********************************************
Itautec-w7535 (Ci3 + 4 GB + Intel-HD)

Guiazsan
(usa Deepin)

Enviado em 10/07/2018 - 17:41h

kkkk Valeu, realmente é muito bom, é monstruosamente rápido kkk, mas ja tive outro probleminha, se puderem me ajudar, agradeceria
https://www.vivaolinux.com.br/topico/Steam-e-Desura/Jogos-Congelando-repentinamente