Problema: Rede Sem Fio - Debian Lenny [RESOLVIDO]

joaoferreira
(usa Fedora)

Enviado em 07/07/2010 - 23:13h

Senhores,

Venho humildemente solicitar ajuda de vocês, à algum tempo atráz instalei o Debian Lenny 5.0 no meu notebook cce tcl-d5.

O problema que vem ocorrendo é o seguinte: Não consigo utilizar a minha placa de rede sem fio.

executei alguns comandos para verificar se conseguia localizar a mesma, obtendo os seguintes resultados.

Commando: lshw -class network

*-network DISABLED
description: Wireless interface
physical id: 2
logical name: wlan0
serial: 00:19:db:a0:41:bf
capabilities: ethernet physical wireless
configuration: broadcast=yes multicast=yes wireless=IEEE 802.11bg

Commando: iwlist scan

lo Interface doesn't support scanning.

eth0 Interface doesn't support scanning.

wmaster0 Interface doesn't support scanning.

wlan0 Interface doesn't support scanning : Network is down

pan0 Interface doesn't support scanning.

Comando: ifconfig wlan0 up
SIOCSIFFLAGS: Arquivo ou diretório não encontrado

Comando: iwconfig

wlan0 IEEE 802.11bg ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=0 dBm
Retry min limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

Comando: lspci

00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02)
00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
06:04.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02)
06:04.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01)
06:04.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01)
06:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)


Alguém poderia me dar uma ajuda de como colocar está minha placa para funcionar?

joaoferreira
(usa Fedora)

Enviado em 08/07/2010 - 00:04h

Pessoal,

Achei a solução no proprio site do debian.

Para quem sofre do mesmo problema que eu achei a solução neste url: http://wiki.debian.org/WiFi/rt73