Placa de TVPixelview Pro no Slackware 12.2

janunesdemor
(usa Slackware)

Enviado em 22/02/2009 - 10:51h

Prezados, tenho uma placa de TV Pixelview Pro bt878, acontece que está dificil sintonizar ela, embora eu consegui. com esta configuração:

Eu crie este escript aqui
modprobe -r bt878
modprobe -r bttv
modprobe -r tuner
modprobe -r msp3400
modprobe bttv card=16 radio=1 tuner=1
sleep 3
chmod ugo+rwx /dev/video0

Pois, bem ela inicia tudo ok... mais não tem som, e mais eu só consigo fazer ela funcionar com xdtv e no kdetv, o tal do tvtime não da nenhum sinal.

Mais o meu problema esta no som, veja a baixo minha configuração completa do computador:

# dmesg
x_risc 7944 1 bttv
tveeprom 15876 1 bttv
cfg80211 27144 2 rt2x00lib,mac80211
eeprom_93cx6 5888 1 rt61pci
snd 51748 23 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_pcm,snd_timer,snd_hwdep
soundcore 10080 1 snd
agpgart 32584 1 nvidia
forcedeth 55952 0
button 10128 0
evdev 13088 3
thermal_sys 15144 3 fan,thermal,processor
hwmon 6300 2 k8temp,thermal_sys
root@darkstar:/inst/bttv-0.9.15#
root@darkstar:/inst/bttv-0.9.15# cd ..
root@darkstar:/inst# cd /tvinit
root@darkstar:/tvinit# ls
canais.txt iniciatv2* intv16_5* tvtuner1*
iniciatv* iniciatvfunciona* tvradio_funciona*
root@darkstar:/tvinit# cat tvtuner1
modprobe -r bt878
modprobe -r bttv
modprobe -r tuner
modprobe bttv card=24 tuner=1
sleep 3
chmod ugo+rwx /dev/video0 root@darkstar:/tvinit# ls
canais.txt iniciatv2* intv16_5* tvtuner1*
iniciatv* iniciatvfunciona* tvradio_funciona*
root@darkstar:/tvinit# cat iniciatv2
modprobe -r bt878
modprobe -r bttv
modprobe -r tuner
modprobe -r msp3400
modprobe bt878 card=16 radio=1 tuner=1
modprobe tvaudio
sleep 3
chmod ugo+rwx /dev/video0

Agora,vendo a configuração completa do computador

root@darkstar:/tvinit# dmesg
up to 37ee0000 @ 10000-16000

ACPI: RSDP 000F7B40, 0014 (r0 Nvidia)
ACPI: RSDT 37EE3000, 0038 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
ACPI: FACP 37EE3080, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
ACPI Warning (tbfadt-0442): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20080609]
ACPI: DSDT 37EE3100, 5C8A (r1 NVIDIA AWRDACPI 1000 MSFT 3000000)
ACPI: FACS 37EE0000, 0040
ACPI: SSDT 37EE8E80, 028A (r1 PTLTD POWERNOW 1 LTP 1)
ACPI: HPET 37EE9140, 0038 (r1 Nvidia AWRDACPI 42302E31 AWRD 98)
ACPI: MCFG 37EE9180, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
ACPI: APIC 37EE8DC0, 0098 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
0MB HIGHMEM available.
894MB LOWMEM available.
mapped low ram: 0 - 37ee0000
low ram: 00000000 - 37ee0000
bootmap 00012000 - 00018fdc
(8 early reservations) ==> bootmem [0000000000 - 0037ee0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 0000a6a790] TEXT DATA BSS ==> [0000100000 - 0000a6a790]
#4 [0000a6b000 - 0000a6f000] INIT_PG_TABLE ==> [0000a6b000 - 0000a6f000]
#5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
found SMP MP-table at [c00f3b00] 000f3b00
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x00037ee0
HighMem 0x00037ee0 -> 0x00037ee0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x00037ee0
On node 0 totalpages: 228975
free_area_init_node: node 0, pgdat c093eb00, node_mem_map c1000200
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 223234 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x10de8201 base: 0xfeff0000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 2 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
PERCPU: Allocating 39452 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 4, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227185
Kernel command line: BOOT_IMAGE=Linux ro root=305 vt.default_utf8=1
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PIT calibration value
Detected 2611.971 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 897892k/916352k available (6388k kernel code, 17820k reserved, 2148k data, 424k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffe19000 - 0xfffff000 (1944 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf7ee0000 ( 894 MB)
.init : 0xc0963000 - 0xc09cd000 ( 424 kB)
.data : 0xc073d137 - 0xc0956278 (2148 kB)
.text : 0xc0100000 - 0xc073d137 (6388 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer frequency.. 5223.94 BogoMIPS (lpj=10447884)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0(2) -> Core 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using C1E aware idle routine
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080609
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 02
Booting processor 1/1 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5224.05 BogoMIPS (lpj=10448100)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1(2) -> Core 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 02
Brought up 2 CPUs
Total of 2 processors activated (10447.99 BogoMIPS).
net_namespace: 776 bytes
xor: automatically using best checksumming function: pIII_sse
pIII_sse : 7949.000 MB/sec
xor: using function: pIII_sse (7949.000 MB/sec)
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
PCI: MCFG area at f0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: 0000:00:01.0 reg 18 io port: [1d00, 1dff]
PCI: 0000:00:01.1 reg 10 io port: [fc00, fc3f]
PCI: 0000:00:01.1 reg 20 io port: [1c00, 1c3f]
PCI: 0000:00:01.1 reg 24 io port: [f400, f43f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
PCI: 0000:00:02.0 reg 10 32bit mmio: [fe02f000, fe02ffff]
pci 0000:00:02.0: supports D1
pci 0000:00:02.0: supports D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
PCI: 0000:00:02.1 reg 10 32bit mmio: [fe02e000, fe02e0ff]
pci 0000:00:02.1: supports D1
pci 0000:00:02.1: supports D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
PCI: 0000:00:05.0 reg 10 32bit mmio: [fe024000, fe027fff]
pci 0000:00:05.0: PME# supported from D3hot D3cold
pci 0000:00:05.0: PME# disabled
PCI: 0000:00:06.0 reg 20 io port: [f000, f00f]
PCI: 0000:00:07.0