Probleminha no Kurumin!

diegopoke
(usa Debian)

Enviado em 12/07/2008 - 22:11h

ola dinovo pessoal de tanto lugar aqui com Kurumin7
deem uma olhada aqui eu tentando conectar a internet
---------

root@kurumin:/home/kurumin# ifconfig
eth0 Encapsulamento do Link: Ethernet Endereço de HW 00:1D:7D:8B:D1:1F
UP BROADCASTMULTICAST MTU:1500 Métrica:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
colisões:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
IRQ:10 Endereço de E/S:0x8000

lo Encapsulamento do Link: Loopback Local
inet end.: 127.0.0.1 Masc:255.0.0.0
endereço inet6: ::1/128 Escopo:Máquina
UP LOOPBACKRUNNING MTU:16436 Métrica:1
RX packets:52 errors:0 dropped:0 overruns:0 frame:0
TX packets:52 errors:0 dropped:0 overruns:0 carrier:0
colisões:0 txqueuelen:0
RX bytes:2600 (2.5 KiB) TX bytes:2600 (2.5 KiB)

root@kurumin:/home/kurumin# pppoeconf eth0
/usr/bin/poff: No pppd is running. None stopped.
Timeout waiting for PADO packets
Timeout waiting for PADO packets
Plugin rp-pppoe.so loaded.
SIOCADDRT: Dispositivo inexistente
root@kurumin:/home/kurumin# ifconf ppp0
bash: ifconf: command not found
root@kurumin:/home/kurumin# ifconfig ppp0
ppp0: erro obtendo informações da interface: %s: dispositivo não encontrado

root@kurumin:/home/kurumin# route add default ppp0
SIOCADDRT: Dispositivo inexistente
root@kurumin:/home/kurumin#

---------------
e tambem tentei
---------------

root@kurumin:/home/kurumin# adsl-setup
Welcome to the Roaring Penguin ADSL client setup. First, I will run
some checks on your system to make sure the PPPoE client is installed
properly...

Looks good! Now, please enter some information:

USER NAME

>>> Enter your PPPoE user name (default internet@speedy.com.br): internet@speedy.com.br

INTERFACE

>>> Enter the Ethernet interface connected to the ADSL modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethn, where 'n' is a number.
(default eth0): eth0

Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped. If you want the link to
stay up permanently, enter 'no' (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP
addresses. You may have some problems with demand-activated links.
>>> Enter the demand value (default no): no

DNS

Please enter the IP address of your ISP's primary DNS server.
If your ISP claims that 'the server will provide DNS addresses',
enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
>>> Enter the DNS information here: 200.204.0.10
Please enter the IP address of your ISP's secondary DNS server.
If you just press enter, I will assume there is only one DNS server.
>>> Enter the secondary DNS server address here: 200.204.0.138

PASSWORD

>>> Please enter your PPPoE password:
>>> Please re-enter your PPPoE password:

FIREWALLING

Please choose the firewall rules to use. Note that these rules are
very basic. You are strongly encouraged to use a more sophisticated
firewall setup; however, these will provide basic security. If you
are running any servers on your machine, you must choose 'NONE' and
set up firewalling yourself. Otherwise, the firewall rules will deny
access to all standard servers like Web, e-mail, ftp, etc. If you
are using SSH, the rules will block outgoing SSH connections which
allocate a privileged source port.

The firewall choices are:
0 - NONE: This script will not set any firewall rules. You are responsible
for ensuring the security of your machine. You are STRONGLY
recommended to use some kind of firewall rules.
1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway
for a LAN
>>> Choose a type of firewall (0-2): 0

** Summary of what you entered **

Ethernet Interface: eth0
User name: internet@speedy.com.br
Activate-on-demand: No
Primary DNS: 200.204.0.10
Secondary DNS: 200.204.0.138
Firewalling: NONE

>>> Accept these settings and adjust configuration files (y/n)? y
Adjusting /etc/ppp/pppoe.conf
Adjusting /etc/resolv.conf
Adjusting /etc/ppp/pap-secrets and /etc/ppp/chap-secrets
(But first backing it up to /etc/ppp/pap-secrets-bak)
(But first backing it up to /etc/ppp/chap-secrets-bak)



Congratulations, it should be all set up!

Type 'adsl-start' to bring up your ADSL link and 'adsl-stop' to bring
it down. Type 'adsl-status' to see the link status.
root@kurumin:/home/kurumin# adsl-start
................TIMED OUT
root@kurumin:/home/kurumin# adsl-status
adsl-status: Link is down (can't read pppoe PID file /var/run/pppoe.conf-adsl.pid.pppoe)
root@kurumin:/home/kurumin# adsl-stop
adsl-stop: No ADSL connection appears to be running
root@kurumin:/home/kurumin#

--------------
e tambem
--------------

root@kurumin:/home/kurumin# pppoe-conf
PPPoE Configurator
Account name: internet@speedy.com.br
Username: internet@speedy.com.br
Password:
Retype password:
Select ethernet device: eth0
Does this computer shares the internet connection? (y/n): y
I am going to create the account file now, hit <CTRL+c> to cancel.
Falha de segmentação
root@kurumin:/home/kurumin#



________________________________
--------------------------------

e mesmo assim a luz do ADSL continua apagada e não entra na internet

alguem ai pode me dar uma luz??
________________________________
--------------------------------

diegopoke
(usa Debian)

Enviado em 12/07/2008 - 22:12h

[On-Line]
diegopoke@hotmail.com

ruydantas
(usa Kurumin)

Enviado em 12/07/2008 - 23:56h

Olá Diego.

Uso o Kurumin e achei mais fácil fazer o roteamento do modem para acessar banda larga.

Pesquisei no ABUSAR.ORG e fiz conforme estava lá.
Tá funcionando que é uma beleza.

O meu modem é um DSL-500B, mas tenho outro ZTE ZXDSL 831 e tb fiz o roteamento dele e funcionou numa boa.