andreuebe
(usa Linux Mint)
Enviado em 08/01/2011 - 10:13h
Caros
Criei uma imagem com mp3 de 3.1 GB com o K3B no Ubuntu 10.10, para ser gravada em um DVD de 4.7GB. Abro a imagem e executo normalmente os arquivos.
Quando tento proceder a gravação na mídia, ocorre o seguinte erro:
ndre@moab:~/Imagens$ cdrecord -v -eject speed=4 dev=/dev/sr0 jana
wodim: No write mode specified.
wodim: Assuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
TOC Type: 1 = CD-ROM
wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.10
SCSI buffer size: 64512
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identification : 'DVD-RAM GSA-H55N'
Revision : '1.03'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x001A (DVD+RW)
Profile: 0x0012 (DVD-RAM)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW) (current)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1409024 = 1376 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
FIFO size : 12582912 = 12288 KB
Track 01: data 3211 MB
Total size: 3688 MB (365:25.66) = 1644425 sectors
Lout start: 3688 MB (365:27/50) = 1644425 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 650679
Speed set to 5540 KB/s
Starting to write CD/DVD at speed 4.0 in real unknown mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01: 3 of 3211 MB written (fifo 99%) [buf 90%] 4.1x.Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 00 07 C0 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0E 00 00 00 00 02 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x02 Qual 0x00 (no seek complete) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.255s timeout 40s
write track data: error after 4063232 bytes
wodim: A write error occured.
wodim: Please properly read the error message above.
Writing time: 39.150s
Average write speed 74.4x.
Min drive buffer fill was 90%
Fixating...
Fixating time: 0.003s
wodim: fifo had 256 puts and 65 gets.
wodim: fifo was 0 times empty and 23 times full, min fill was 94%.
Alguem pode ajudar?
Obrigado desde já.
Andre Uebe