Erro no .profile ao iniciar o sistema.

1. Erro no .profile ao iniciar o sistema.

Nicolas_SS
(usa Ubuntu)

Enviado em 17/05/2022 - 20:22h

Ao iniciar o sistema recebo a seguinte mensagem:

Erro encontrado no carregamento do /home/usuario/.profile:

tput: No value for $TERM and no -T specified

Como resultado a sessão não sera configurada corretamente.
Corrija o problema o mais rápido possível.

Arquivo .profile

# ~/.profile: executed by the command interpreter for login shells.
# This file is not read by bash(1), if ~/.bash_profile or ~/.bash_login
# exists.
# see /usr/share/doc/bash/examples/startup-files for examples.
# the files are located in the bash-doc package.

# the default umask is set in /etc/profile; for setting the umask
# for ssh logins, install and configure the libpam-umask package.
#umask 022

# if running bash
if [ -n "$BASH_VERSION" ]; then
    # include .bashrc if it exists
    if [ -f "$HOME/.bashrc" ]; then
	. "$HOME/.bashrc"
    fi
fi

# set PATH so it includes user's private bin if it exists
if [ -d "$HOME/bin" ] ; then
    PATH="$HOME/bin:$PATH"
fi

# set PATH so it includes user's private bin if it exists
if [ -d "$HOME/.local/bin" ] ; then
    PATH="$HOME/.local/bin:$PATH"
fi

0 0

Quote

2. Re: Erro no .profile ao iniciar o sistema.

leoCCB
(usa Slackware)

Enviado em 17/05/2022 - 22:52h

Nicolas_SS escreveu:

Ao iniciar o sistema recebo a seguinte mensagem:

Erro encontrado no carregamento do /home/usuario/.profile:

tput: No value for $TERM and no -T specified

Como resultado a sessão não sera configurada corretamente.
Corrija o problema o mais rápido possível.

Arquivo .profile

# ~/.profile: executed by the command interpreter for login shells.
# This file is not read by bash(1), if ~/.bash_profile or ~/.bash_login
# exists.
# see /usr/share/doc/bash/examples/startup-files for examples.
# the files are located in the bash-doc package.

# the default umask is set in /etc/profile; for setting the umask
# for ssh logins, install and configure the libpam-umask package.
#umask 022

# if running bash
if [ -n "$BASH_VERSION" ]; then
    # include .bashrc if it exists
    if [ -f "$HOME/.bashrc" ]; then
	. "$HOME/.bashrc"
    fi
fi

# set PATH so it includes user's private bin if it exists
if [ -d "$HOME/bin" ] ; then
    PATH="$HOME/bin:$PATH"
fi

# set PATH so it includes user's private bin if it exists
if [ -d "$HOME/.local/bin" ] ; then
    PATH="$HOME/.local/bin:$PATH"
fi

Esse .profile carrega o .bashrc... pelo visto está reclamando da variável TERM q podem estar mal setada no .bashrc.... passa o .bashrc aí pra gente dar uma zoiada nele. Agora estou no windowns... mas se vc der um "echo $TERM" deve aparecer um valor aí... se não aparecer resultado nenhum é esse o pepino...

0 0

Quote

3. Re: Erro no .profile ao iniciar o sistema.

Nicolas_SS
(usa Ubuntu)

Enviado em 18/05/2022 - 04:08h

O resultado do comando echo $TERM eh:

xterm-256color

Arquivo .bashrc do usuário.

############################################################################
####                          CUSTOMIZAR BASH                           ####
## copie este cógigo e cole no final do seu arquivo *.bashrc* na sua home ##
bash_prompt_command() {
	# How many characters of the $PWD should be kept
	local pwdmaxlen=25

	# Indicate that there has been dir truncation
	local trunc_symbol=".."

	# Store local dir
	local dir=${PWD##*/}

	# Which length to use
	pwdmaxlen=$(( ( pwdmaxlen < ${#dir} ) ? ${#dir} : pwdmaxlen ))

	NEW_PWD=${PWD/#$HOME/\~}
	#GIT_BRANCH="$(__git_ps1 " (%s)")"
	
	local pwdoffset=$(( ${#NEW_PWD} - pwdmaxlen ))

	# Generate name
	if [ ${pwdoffset} -gt "0" ]
	then
		NEW_PWD=${NEW_PWD:$pwdoffset:$pwdmaxlen}
		NEW_PWD=${trunc_symbol}/${NEW_PWD#*/}
	fi
}


format_font()
{
	## FIRST ARGUMENT TO RETURN FORMAT STRING
	local output=$1


	case $# in
	2)
		eval $output="'\[\033[0;${2}m\]'"
		;;
	3)
		eval $output="'\[\033[0;${2};${3}m\]'"
		;;
	4)
		eval $output="'\[\033[0;${2};${3};${4}m\]'"
		;;
	*)
		eval $output="'\[\033[0m\]'"
		;;
	esac
}



##
## COLORIZE BASH PROMT
##
bash_prompt() {

	export LS_OPTIONS='--color=auto'
	eval "`dircolors`"
	alias ls='ls $LS_OPTIONS'
	alias ll='ls $LS_OPTIONS -l'
	alias l='ls $LS_OPTIONS -lA'

	############################################################################
	## COLOR CODES                                                            ##
	## These can be used in the configuration below                           ##
	############################################################################
	
	## FONT EFFECT
	local      NONE='0'
	local      BOLD='1'
	local       DIM='2'
	local UNDERLINE='4'
	local     BLINK='5'
	local    INVERT='7'
	local    HIDDEN='8'
	
	
	## COLORS
	local   DEFAULT='9'
	local     BLACK='0'
	local       RED='1'
	local     GREEN='2'
	local    YELLOW='3'
	local      BLUE='4'
	local   MAGENTA='5'
	local      CYAN='6'
	local    L_GRAY='7'
	local    D_GRAY='60'
	local     L_RED='61'
	local   L_GREEN='62'
	local  L_YELLOW='63'
	local    L_BLUE='64'
	local L_MAGENTA='65'
	local    L_CYAN='66'
	local     WHITE='67'
	
	
	## TYPE
	local     RESET='0'
	local    EFFECT='0'
	local     COLOR='30'
	local        BG='40'
	
	
	## 256 COLOR CODES
	local NO_FORMAT="\[\033[0m\]"
	local ORANGE_BOLD="\[\033[1;38;5;208m\]"
	local TOXIC_GREEN_BOLD="\[\033[1;38;5;118m\]"
	local RED_BOLD="\[\033[1;38;5;1m\]"
	local CYAN_BOLD="\[\033[1;38;5;87m\]"
	local BLACK_BOLD="\[\033[1;38;5;0m\]"
	local WHITE_BOLD="\[\033[1;38;5;15m\]"
	local GRAY_BOLD="\[\033[1;90m\]"
	local BLUE_BOLD="\[\033[1;38;5;74m\]"
	

	
	############################################################################
	## CONFIGURATION                                                          ##
	## Escolha sua configuração de cores aqui                                 ##
	############################################################################

	## DEFAUT
	FONT_COLOR_1=$WHITE; BACKGROUND_1=$BLUE; TEXTEFFECT_1=$BOLD
	FONT_COLOR_2=$WHITE; BACKGROUND_2=$L_BLUE; TEXTEFFECT_2=$BOLD
	FONT_COLOR_3=$D_GRAY; BACKGROUND_3=$WHITE; TEXTEFFECT_3=$BOLD
	PROMT_FORMAT=$BLUE_BOLD

	############################################################################
	## TEXT FORMATING                                                         ##
	## Generate the text formating according to configuration                 ##
	############################################################################
	
	## CONVERT CODES: add offset
	FC1=$(($FONT_COLOR_1+$COLOR))
	BG1=$(($BACKGROUND_1+$BG))
	FE1=$(($TEXTEFFECT_1+$EFFECT))
	
	FC2=$(($FONT_COLOR_2+$COLOR))
	BG2=$(($BACKGROUND_2+$BG))
	FE2=$(($TEXTEFFECT_2+$EFFECT))
	
	FC3=$(($FONT_COLOR_3+$COLOR))
	BG3=$(($BACKGROUND_3+$BG))
	FE3=$(($TEXTEFFECT_3+$EFFECT))
	
	FC4=$(($FONT_COLOR_4+$COLOR))
	BG4=$(($BACKGROUND_4+$BG))
	FE4=$(($TEXTEFFECT_4+$EFFECT))
	

	## CALL FORMATING HELPER FUNCTION: effect + font color + BG color
	local TEXT_FORMAT_1
	local TEXT_FORMAT_2
	local TEXT_FORMAT_3
	local TEXT_FORMAT_4	
	format_font TEXT_FORMAT_1 $FE1 $FC1 $BG1
	format_font TEXT_FORMAT_2 $FE2 $FC2 $BG2
	format_font TEXT_FORMAT_3 $FC3 $FE3 $BG3
	format_font TEXT_FORMAT_4 $FC4 $FE4 $BG4
	
	
	# GENERATE PROMT SECTIONS
	local PROMT_USER=$"$TEXT_FORMAT_1 \u "
	local PROMT_HOST=$"$TEXT_FORMAT_2 \h "
	local PROMT_PWD=$"$TEXT_FORMAT_3 \${NEW_PWD} \${GIT_BRANCH} "
	local PROMT_INPUT=$"$PROMT_FORMAT "


	############################################################################
	## SEPARATOR FORMATING                                                    ##
	## Generate the separators between sections                               ##
	## Uses background colors of the sections                                 ##
	############################################################################
	
	## CONVERT CODES
	TSFC1=$(($BACKGROUND_1+$COLOR))
	TSBG1=$(($BACKGROUND_2+$BG))
	
	TSFC2=$(($BACKGROUND_2+$COLOR))
	TSBG2=$(($BACKGROUND_3+$BG))
	
	TSFC3=$(($BACKGROUND_3+$COLOR))
	TSBG3=$(($DEFAULT+$BG))
	

	## CALL FORMATING HELPER FUNCTION: effect + font color + BG color
	local SEPARATOR_FORMAT_1
	local SEPARATOR_FORMAT_2
	local SEPARATOR_FORMAT_3
	format_font SEPARATOR_FORMAT_1 $TSFC1 $TSBG1
	format_font SEPARATOR_FORMAT_2 $TSFC2 $TSBG2
	format_font SEPARATOR_FORMAT_3 $TSFC3 $TSBG3
	

	## GENERATE SEPARATORS WITH FANCY TRIANGLE
	#local TRIANGLE=$'&#128055; '
	#local TRIANGLE=$'\uE0B0'	
	local SEPARATOR_1=$SEPARATOR_FORMAT_1$TRIANGLE
	local SEPARATOR_2=$SEPARATOR_FORMAT_2$TRIANGLE
	local SEPARATOR_3=$SEPARATOR_FORMAT_3$TRIANGLE


	############################################################################
	## WINDOW TITLE                                                           ##
	## Prevent messed up terminal-window titles                               ##
	############################################################################
	case $TERM in
	xterm*|rxvt*)
		local TITLEBAR='\[\033]0;\u:${NEW_PWD}\007\]'
		;;
	*)
		local TITLEBAR=""
		;;
	esac


	############################################################################
	## BASH PROMT                                                             ##
	## Generate promt and remove format from the rest                         ##
	############################################################################
	PS1="$TITLEBAR\n${PROMT_USER}${SEPARATOR_1}${PROMT_HOST}${SEPARATOR_2}${PROMT_PWD}${SEPARATOR_3}${PROMT_INPUT}"

	
	## For terminal line coloring, leaving the rest standard
	none="$(tput sgr0)"
	trap 'echo -ne "${none}"' DEBUG
}


################################################################################
##  MAIN                                                                      ##
################################################################################

##	Bash provides an environment variable called PROMPT_COMMAND. 
##	The contents of this variable are executed as a regular Bash command 
##	just before Bash displays a prompt. 
##	We want it to call our own command to truncate PWD and store it in NEW_PWD
PROMPT_COMMAND=bash_prompt_command

##	Call bash_promnt only once, then unset it (not needed any more)
##	It will set $PS1 with colors and relative to $NEW_PWD, 
##	which gets updated by $PROMT_COMMAND on behalf of the terminal
bash_prompt
unset bash_prompt 

alias ls='ls --color=auto'
LS_COLORS='no=00:fi=00:di=00;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.ogg=01;35:*.mp3=01;35:*.wav=01;35:'
export LS_COLORS

0 0

Quote

4. Re: Erro no .profile ao iniciar o sistema.

leandropscardua
(usa Ubuntu)

Enviado em 18/05/2022 - 09:34h

Os arquivos .bashrc e .profile são copiados de /etc/skel durante a criação do usuário. Para voltar ao original vc pode fazer cp /etc/skel/.profile ~/.profile ou cp /etc/skel/.bashrc ~/.bashrc tomando o cuidado de fazer uma cópia de backup antes.

0 0

Quote

5. Re: Erro no .profile ao iniciar o sistema.

Nicolas_SS
(usa Ubuntu)

Enviado em 19/05/2022 - 15:01h

leandropscardua escreveu:

Os arquivos .bashrc e .profile são copiados de /etc/skel durante a criação do usuário. Para voltar ao original vc pode fazer cp /etc/skel/.profile ~/.profile ou cp /etc/skel/.bashrc ~/.bashrc tomando o cuidado de fazer uma cópia de backup antes.

O problema é que se substituir o.bashrc o terminal ficará como padrão; o .profile analisando por cima é igual, mas mesmo assim substitui, porem o problema persiste. Provavelmente, ao mexer no .bashrc eu fiz algo de errado.

0 0

Quote

6. Re: Erro no .profile ao iniciar o sistema.

leandropscardua
(usa Ubuntu)

Enviado em 19/05/2022 - 22:41h

Nicolas_SS escreveu:

Se quiser comparar as mudanças nos dois arquivos pode usar o diff - https://www.vivaolinux.com.br/dica/diff-Comando-com-exemplos
Agora, se quer consertar o sistema vc deve voltar a um estado consistente e depois ir mudando aos poucos. Uma dica p testar o .bashrc sem precisar deslogar ou reiniciar é fazer uma mudança e depois digitar source ~/.bashrc ou . ~/.bashrc daí se a mudança gerar problema vc desfaz. Vc também pode testar fazendo login via su (su "nome do usuario")

0 0

Quote

7. Re: Erro no .profile ao iniciar o sistema.

leoCCB
(usa Slackware)

Enviado em 20/05/2022 - 22:31h

Nicolas_SS escreveu:

O resultado do comando echo $TERM eh:

xterm-256color

Arquivo .bashrc do usuário.

############################################################################
####                          CUSTOMIZAR BASH                           ####
## copie este cógigo e cole no final do seu arquivo *.bashrc* na sua home ##
bash_prompt_command() {
	# How many characters of the $PWD should be kept
	local pwdmaxlen=25

	# Indicate that there has been dir truncation
	local trunc_symbol=".."

	# Store local dir
	local dir=${PWD##*/}

	# Which length to use
	pwdmaxlen=$(( ( pwdmaxlen < ${#dir} ) ? ${#dir} : pwdmaxlen ))

	NEW_PWD=${PWD/#$HOME/\~}
	#GIT_BRANCH="$(__git_ps1 " (%s)")"
	
	local pwdoffset=$(( ${#NEW_PWD} - pwdmaxlen ))

	# Generate name
	if [ ${pwdoffset} -gt "0" ]
	then
		NEW_PWD=${NEW_PWD:$pwdoffset:$pwdmaxlen}
		NEW_PWD=${trunc_symbol}/${NEW_PWD#*/}
	fi
}


format_font()
{
	## FIRST ARGUMENT TO RETURN FORMAT STRING
	local output=$1


	case $# in
	2)
		eval $output="'\[\033[0;${2}m\]'"
		;;
	3)
		eval $output="'\[\033[0;${2};${3}m\]'"
		;;
	4)
		eval $output="'\[\033[0;${2};${3};${4}m\]'"
		;;
	*)
		eval $output="'\[\033[0m\]'"
		;;
	esac
}



##
## COLORIZE BASH PROMT
##
bash_prompt() {

	export LS_OPTIONS='--color=auto'
	eval "`dircolors`"
	alias ls='ls $LS_OPTIONS'
	alias ll='ls $LS_OPTIONS -l'
	alias l='ls $LS_OPTIONS -lA'

	############################################################################
	## COLOR CODES                                                            ##
	## These can be used in the configuration below                           ##
	############################################################################
	
	## FONT EFFECT
	local      NONE='0'
	local      BOLD='1'
	local       DIM='2'
	local UNDERLINE='4'
	local     BLINK='5'
	local    INVERT='7'
	local    HIDDEN='8'
	
	
	## COLORS
	local   DEFAULT='9'
	local     BLACK='0'
	local       RED='1'
	local     GREEN='2'
	local    YELLOW='3'
	local      BLUE='4'
	local   MAGENTA='5'
	local      CYAN='6'
	local    L_GRAY='7'
	local    D_GRAY='60'
	local     L_RED='61'
	local   L_GREEN='62'
	local  L_YELLOW='63'
	local    L_BLUE='64'
	local L_MAGENTA='65'
	local    L_CYAN='66'
	local     WHITE='67'
	
	
	## TYPE
	local     RESET='0'
	local    EFFECT='0'
	local     COLOR='30'
	local        BG='40'
	
	
	## 256 COLOR CODES
	local NO_FORMAT="\[\033[0m\]"
	local ORANGE_BOLD="\[\033[1;38;5;208m\]"
	local TOXIC_GREEN_BOLD="\[\033[1;38;5;118m\]"
	local RED_BOLD="\[\033[1;38;5;1m\]"
	local CYAN_BOLD="\[\033[1;38;5;87m\]"
	local BLACK_BOLD="\[\033[1;38;5;0m\]"
	local WHITE_BOLD="\[\033[1;38;5;15m\]"
	local GRAY_BOLD="\[\033[1;90m\]"
	local BLUE_BOLD="\[\033[1;38;5;74m\]"
	

	
	############################################################################
	## CONFIGURATION                                                          ##
	## Escolha sua configuração de cores aqui                                 ##
	############################################################################

	## DEFAUT
	FONT_COLOR_1=$WHITE; BACKGROUND_1=$BLUE; TEXTEFFECT_1=$BOLD
	FONT_COLOR_2=$WHITE; BACKGROUND_2=$L_BLUE; TEXTEFFECT_2=$BOLD
	FONT_COLOR_3=$D_GRAY; BACKGROUND_3=$WHITE; TEXTEFFECT_3=$BOLD
	PROMT_FORMAT=$BLUE_BOLD

	############################################################################
	## TEXT FORMATING                                                         ##
	## Generate the text formating according to configuration                 ##
	############################################################################
	
	## CONVERT CODES: add offset
	FC1=$(($FONT_COLOR_1+$COLOR))
	BG1=$(($BACKGROUND_1+$BG))
	FE1=$(($TEXTEFFECT_1+$EFFECT))
	
	FC2=$(($FONT_COLOR_2+$COLOR))
	BG2=$(($BACKGROUND_2+$BG))
	FE2=$(($TEXTEFFECT_2+$EFFECT))
	
	FC3=$(($FONT_COLOR_3+$COLOR))
	BG3=$(($BACKGROUND_3+$BG))
	FE3=$(($TEXTEFFECT_3+$EFFECT))
	
	FC4=$(($FONT_COLOR_4+$COLOR))
	BG4=$(($BACKGROUND_4+$BG))
	FE4=$(($TEXTEFFECT_4+$EFFECT))
	

	## CALL FORMATING HELPER FUNCTION: effect + font color + BG color
	local TEXT_FORMAT_1
	local TEXT_FORMAT_2
	local TEXT_FORMAT_3
	local TEXT_FORMAT_4	
	format_font TEXT_FORMAT_1 $FE1 $FC1 $BG1
	format_font TEXT_FORMAT_2 $FE2 $FC2 $BG2
	format_font TEXT_FORMAT_3 $FC3 $FE3 $BG3
	format_font TEXT_FORMAT_4 $FC4 $FE4 $BG4
	
	
	# GENERATE PROMT SECTIONS
	local PROMT_USER=$"$TEXT_FORMAT_1 \u "
	local PROMT_HOST=$"$TEXT_FORMAT_2 \h "
	local PROMT_PWD=$"$TEXT_FORMAT_3 \${NEW_PWD} \${GIT_BRANCH} "
	local PROMT_INPUT=$"$PROMT_FORMAT "


	############################################################################
	## SEPARATOR FORMATING                                                    ##
	## Generate the separators between sections                               ##
	## Uses background colors of the sections                                 ##
	############################################################################
	
	## CONVERT CODES
	TSFC1=$(($BACKGROUND_1+$COLOR))
	TSBG1=$(($BACKGROUND_2+$BG))
	
	TSFC2=$(($BACKGROUND_2+$COLOR))
	TSBG2=$(($BACKGROUND_3+$BG))
	
	TSFC3=$(($BACKGROUND_3+$COLOR))
	TSBG3=$(($DEFAULT+$BG))
	

	## CALL FORMATING HELPER FUNCTION: effect + font color + BG color
	local SEPARATOR_FORMAT_1
	local SEPARATOR_FORMAT_2
	local SEPARATOR_FORMAT_3
	format_font SEPARATOR_FORMAT_1 $TSFC1 $TSBG1
	format_font SEPARATOR_FORMAT_2 $TSFC2 $TSBG2
	format_font SEPARATOR_FORMAT_3 $TSFC3 $TSBG3
	

	## GENERATE SEPARATORS WITH FANCY TRIANGLE
	#local TRIANGLE=$'&#128055; '
	#local TRIANGLE=$'\uE0B0'	
	local SEPARATOR_1=$SEPARATOR_FORMAT_1$TRIANGLE
	local SEPARATOR_2=$SEPARATOR_FORMAT_2$TRIANGLE
	local SEPARATOR_3=$SEPARATOR_FORMAT_3$TRIANGLE


	############################################################################
	## WINDOW TITLE                                                           ##
	## Prevent messed up terminal-window titles                               ##
	############################################################################
	case $TERM in
	xterm*|rxvt*)
		local TITLEBAR='\[\033]0;\u:${NEW_PWD}\007\]'
		;;
	*)
		local TITLEBAR=""
		;;
	esac


	############################################################################
	## BASH PROMT                                                             ##
	## Generate promt and remove format from the rest                         ##
	############################################################################
	PS1="$TITLEBAR\n${PROMT_USER}${SEPARATOR_1}${PROMT_HOST}${SEPARATOR_2}${PROMT_PWD}${SEPARATOR_3}${PROMT_INPUT}"

	
	## For terminal line coloring, leaving the rest standard
	none="$(tput sgr0)"
	trap 'echo -ne "${none}"' DEBUG
}


################################################################################
##  MAIN                                                                      ##
################################################################################

##	Bash provides an environment variable called PROMPT_COMMAND. 
##	The contents of this variable are executed as a regular Bash command 
##	just before Bash displays a prompt. 
##	We want it to call our own command to truncate PWD and store it in NEW_PWD
PROMPT_COMMAND=bash_prompt_command

##	Call bash_promnt only once, then unset it (not needed any more)
##	It will set $PS1 with colors and relative to $NEW_PWD, 
##	which gets updated by $PROMT_COMMAND on behalf of the terminal
bash_prompt
unset bash_prompt 

alias ls='ls --color=auto'
LS_COLORS='no=00:fi=00:di=00;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.ogg=01;35:*.mp3=01;35:*.wav=01;35:'
export LS_COLORS

comenta essa linha
# xterm*|rxvt*)
e coloca direto o xterm-256color
deixando o bloco assim:

case $TERM in
# xterm*|rxvt*)
xterm-256color)
local TITLEBAR='\[\033]0;\u:${NEW_PWD}\007\]'
e também reinstalar o xterm... pode ser q resolva.

Cara, onde vc arrumou esse script? Tá bem escrito pra caramba!! Não entendo quase nada de Shell, mas pelo pouco q entendo percebo q o programador soube escolher os comandos mais rápidos aí!! Outra coisa q eu tentaria seria colocar a dupla de dois pontos no fim das linhas e não na próxima, embora funcione bem nos blocos acima... não custa tentar, e ficariam com essa carinha aqui
case $TERM in
# xterm*|rxvt*)
xterm-256color)
local TITLEBAR='\[\033]0;\u:${NEW_PWD}\007\]' ;;
*) local TITLEBAR="" ;;
esac

0 0

Quote